Ford 2009 edc16c34 not start after egr by obd

[rob h]

Hello guys,


Ford Focus 2008-2010 1.6tdci edc16C34 109HP.
0281015608


I could read this ecus flash by obd using MMS.
After writing back the egr off file, immo light kept flashing.
With Magicmms, no communication by obd.




Bdm ktag, i can read eepr and flash.


What has gone wrong?
Tp, or lost off synch immo?
Bad egr file?


How do i fix this?
Car is keyless go, does it have immo in cluster, so i can make synch?




BOSCH EDC16C34/5.95 MPC562

[rafal]

find out ori file - write bdm by ktag
and have a look if comm will come back with ecu by obd

[rob h]

https://www.digital-kaos.co.uk/forums/showthread.php/832856-I-need-Full-BDM-for-Ford-1-6-EDC16-0281015608?highlight=0281015608

I found a flash, no eepr.

[morgano]

Locate good original flash and restore it with KTAG bdm. Or take BDM backup now, and upload here the backuped flash and the original obd reading.

[morgano]

Don't overwrite your original eeprom without have taken a bdm backup of it. ;)

[rafal]

Don't overwrite your original eeprom without have taken a bdm backup of it. ;)

i think - it is 1st move which must be done...............

[rob h]

806145

MMS obd read
MMS written egr
Ktag bdm

[morgano]

806145

MMS obd read
MMS written egr
Ktag bdm

Try upload this reconstructed flash with bdm and see if car start or at least comms come back on OBD ;)

[rob h]

Thanks
Yes, Car runs with the recovery flash.
I transfered the egr mod, direct to the recovery flash.
All good!