Imo Off Palio IAW 1G7SP.73 need

[marcosjdm]

Read HC11F1,
All FF not work, position 000126 [00] not work...
Can you help me please...
Thanx

[DANILLO]

How to reset the code of Palio IAW 1G7

1. Save the file in an eprom 27C512 reset.bin Dip
2. Remove the ecu from vehicle
3. Remove the original 27c512 and preserve this original chip - dont erase or damage you need this chip ok.
4. Place the chip that programmed the clock file/reset.bin in the ecu
5. remove the vehicle immobilizer module from vehicle, insert the ecu on car with the 'reset.bin' chip
6. turn the ignition and wait on average 2 minutes
7. Turn off the ignition and remove the ecu from vehicle
8. Replace the 'reset' chip with the orginal eeprom and done!


Warning: The module immobilizer had been permanently shut down.