Rover 75 remote

[p1et]

Hello,

I was repairing two remotes from Rover 75. I fixed them both and they were operating but I 'washed' the label from one of them. Now customer needed change shell in the one without label. So I changed shell and battery, tested remote on table couple of times for signal and now ot doesn't work, it lost its sync. The second one is working fine.

Is it possible to somehow obtain barcode for this remote having the second original key with barcode? Is there some pattern for it, that they will look simillar?

I found this https://www.digital-kaos.co.uk/forums/showthread.php/612692-rover-75-bar-code-need?p=3088880&viewfull=1#post3088880

thread and you can see the 2 original remotes differ only by 1 digit. So maybe it's a chance. If not, I will buy new remote but customer is not willing to afford new, that's why I want to try reprogram this but without label it became complicated...

I attach photo from working remote with barcode

[lion0304]

Hello,

I was repairing two remotes from Rover 75. I fixed them both and they were operating but I 'washed' the label from one of them. Now customer needed change shell in the one without label. So I changed shell and battery, tested remote on table couple of times for signal and now ot doesn't work, it lost its sync. The second one is working fine.

Is it possible to somehow obtain barcode for this remote having the second original key with barcode? Is there some pattern for it, that they will look simillar?

I found this https://www.digital-kaos.co.uk/forums/showthread.php/612692-rover-75-bar-code-need?p=3088880&viewfull=1#post3088880

thread and you can see the 2 original remotes differ only by 1 digit. So maybe it's a chance. If not, I will buy new remote but customer is not willing to afford new, that's why I want to try reprogram this but without label it became complicated...

I attach photo from working remote with barcode

I alway take picture before work on this. Did you tried to manual resync?

For Discovery, when i try with car, alway work without any sync.

[P&D]

Without the sticker I think you knacker pal
just buy a 2nd hand board off the well known auction site and calculate the barcode
job done

[PierreTheron]

WITH kdiy you can generate new remote with barcode ... Cheaper option i believe ..

TOAF software works great for adding these remotes with just the white label inside the key .
Otherwise get secondhand key from somewhere and use the remote..

[super jumbe]

WITH kdiy you can generate new remote with barcode ... Cheaper option i believe ..

So keydiy will generate barcode as well is that you own about...

[PierreTheron]

yes mate . it generate barcode for mg pectron remotes also...

https://translate.google.com/translate?hl=en&sl=pl&u=https://toaf.roverki.eu/index.php/pl/&prev=search&pto=aue

[p1et]

I was browsing keydiy list but found only for Mini? Which one exactly I need generate?


I alway take picture before work on this. Did you tried to manual resync?



I even think I did make a photo but it was more than 1 month ago, no time to search now, this is not so important to dig so long :P I tried some different kind of manual resync stuff but none work, door lock is also broken.

[PierreTheron]

Landrover same as Rover ...

Look under mg 7 you will find your key ...

I do not want row to get wise on this ..
But they got it right ..

[musti418]

The mg7 model may start with barcode N.

[PierreTheron]

The mg7 model may start with barcode N.


you clever tell me please ??????????

[musti418]

Hello, if the barcode does not start with N = the program may not be successful. I mean.

[PierreTheron]

you throwing me another direction m8 so leave it at that
i make mg tf remotes from barcodes supplied vbu kdiy almost every second day

So if you had brain ,exe on your side you could have figured it out ...
so do not blame me for knowing nothing

I have done it my way and it is working so why fight the opposite

[p1et]

Guys, chill please. Everyone just wanna learn something and discuss his experience, relax :)

Thanks for all the answers, I'm gonna try keydiy then.

[PierreTheron]

vvdi2 ccan do it f you force it in right direction gepag had better clever brains in making people think his way Regards and Rip

[musti418]

I sincerely apologize.

[P&D]

WITH kdiy you can generate new remote with barcode ... Cheaper option i believe ...

Very correct sir with the info which is the missing part from the post is HOW..........

The way is make the KEYDIY remote then it makes the barcode but they are all made as N (Rover) (or where unless they have fixed it)
the part you need to learn is how to change the barcode for the car model BMW/LANDROVER if you need these

It not as easy as changing the 1st letter...X (BMW) G(LANDROVER)....the trick is to work out the white sticker label number from the barcode produced by Keydiy then change it.

Thats where the hard bit starts lol.......for this you need to make a remote with the keydiy and compare the barcodes they make with the calculator on DK made by Paul

it will all be clear after.....see below

N246B43246B42FFQ
FFFFFFFFDB94BC8


X246B43246B42FF-
FFFFFFFFDB94BC8


G246B43246B42FFJ
FFFFFFFFDB94BC8

So now you know the white sticker label if it was on a keydiy remote lol
just make the barcode lol

[Manta1600]

2 years ago I programmed KD on Rover 75 so for sure this is possible

If I remember correct I used Excel calculator that I found in this forum will try to find it

[Manta1600]

This is the calc

[PierreTheron]

p1et use the free TOAF software with some k line cable for rover 75 .
you can erase all old barcodes and you only need white sticker in old remote to add it to the vehicle or i think find your missing white label code as well ...