VOLVO S40, V50 EEPROMs CEM and SCL

[Holtek]

I need pair: EEPROM SCL 95010 and EEPROM CEM - VOLVO V50, S40 2003-2005


EDIT:

I found a way to completely remove SCL in all VOLVO. Even if your SCL module is damaged. C30, S40, V50, S80 from 2004 and newer. I can help but you need to send me one key plus CEM module. There is no way to fix it remotely by just uploading the files - it is not possible. The repair takes 1 business day, then the module and the key will be returned to you by courier. Shipment to Poland. Send PM.

Thanks

[MartiLer]

you can make sync in your dumps

[Holtek]

Thank you for your response. Here are my files. Unfortunately, but the SCL blocked, I changed the mechanism, put it in the same position - blocked, but still not working.

[MartiLer]

synchro is fine. clean up the garbage in the latch dump

[Holtek]

You mean, I need to clear all DTCS?

[MartiLer]

not. you need to edit the dump by hand. Volvo love hands and not a push-button solution.

[Holtek]

OK I got it and can you tell which bytes where garbage is?

[Holtek]

MartiLer he did not want to help, he only gave generalities. I solved the problem myself. If anyone has a similar problem, post a PM, I will help with your files. Thanks

[rdu04]

Hello Holtek,can you tell me how you solved the problem?my scl have epr 95040,attach dump

[Holtek]

what's your problem with this SCL?

[Sokolow]

Hello
I have the same problem as you. After replacing the motor, the ESL does not work

[Holtek]

Please check and raport.

[rdu04]

scl was blocked,i changed the one-second mechanism and the original eprom but it doesn't work

you can check if the dump is good?can you fixed in dump please?or cem and scl synchronization is needed

[cardivision]

http://www.digital-kaos.co.uk/forums/images/icons/icon1.png
Hello Holtek,can you help me to solved the problem?my scl fail just after changing the motor. if you can i will send you the file.
Thank you

[Dave Knapp]

HI I HAVE SAME PROBLEM

[Holtek]

I found a way to completely remove SCL in all VOLVO. Even if your SCL module is damaged. C30, S40, V50, S80 from 2004 and newer. I can help but you need to send me one key plus CEM module. There is no way to fix it remotely by just uploading the files - it is not possible. The repair takes 1 business day, then the module and the key will be returned to you by courier. Shipment to Poland. Send PM.

[dennisdejeu]

hi there Holtek
can u try fix my v50 scl dump too ?
thanks in advance

[Holtek]

You must send to me your CEM and SCL modules.

[dennisdejeu]

thank you for quick response
here you go
scl ori changed motor, relay and switch

[Holtek]

No no, not one more time. Firstly. You sent ONLY eeproms. Where are the Flashes? CEM consists of 2x Flash and 2x EEPROM.

[dennisdejeu]

ok ..have it
no problem
here u go

[Holtek]

I have checked your files and it is not possible to remove or repair SCL remotely. You need to take a cardboard box. Put in the box: CEM, SCL and send to me, to Poland. I will permanently remove SCL. The package returns to you. You mount the CEM, the car starts without SCL.

[aceton]

The same problem.
ESL repaired, working ok, launch x431 show lock/unlock but start is not allowed.

[MartiLer]

aceton has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

[maki]

I have problem with SCL on s80 2007 year,CEM 6G9T-14C256-HF.
Start car 3-4 times and SCL stay open,immobilizer activate..not crank not start.
With FVDI reset CEM and work same any time,with SCL emulator same.
Can maybe repair CEM eeprom or disable SCL?
What need read eeprom or must same read mcu?

Thanks!