Help Clio 4 key

[davideopel]

Hi everyone, I have a problem. I tried to add a key with renolink and now I have the car that doesn't even start with the first key. I have read that Renolink creates problems for hfm. How can I solve? I have vvdi, official ktag, but I don't have Reno ECU toll.

[Autronico2]

Hi everyone, I have a problem. I tried to add a key with renolink and now I have the car that doesn't even start with the first key. I have read that Renolink creates problems for hfm. How can I solve? I have vvdi, official ktag, but I don't have Reno ECU toll.


Hi, you need equipment to clone keys, you have to connect to the UCH, read the pin code and try to adapt the old keys again, if it doesn't let you do it, you have to create new transponders for the keys.

[davideopel]

Thank you so much . I have a colleague who uses zedfull with him can I solve?

[Autronico2]

Thank you so much . I have a colleague who uses zedfull with him can I solve?


Yes, with zedfull you can solve it

[credoline]

Related to yours thread. VVDI have option to backup HFM module flash file from D70F3633. Next time, first remove HFM open it and do backup. After that use Renolink. Because with Renolink or Reno ecu tool to be able to add new key card you need pin code. Pin code is located in HFM, to read HFM, Renolink, i do not know what do it with HFM module flash, put in boot mode or clear some data, i do not know. But whatever software do it, you can always restore it from backup. My opinion is that is nothing wrong with yours UCH than with HFM.

[credoline]

What to clone? When original working key work no more? Its not key problem, HFM is problem now.


Hi, you need equipment to clone keys, you have to connect to the UCH, read the pin code and try to adapt the old keys again, if it doesn't let you do it, you have to create new transponders for the keys.

[davideopel]

So what should I do now? Does Zedfull solve anything?

[credoline]

I do not believe. I think you need now HFM module virgin file. Or maybe good file and make it virgin with Renolink, if possible. But you will need it original pin code to again use original worked key.


So what should I do now? Does Zedfull solve anything?

[davideopel]

If I get the original PIN, can I program and start the car?

[credoline]

I think no. First you need to repair HFM module. But let some other member give you better advice.

[davideopel]

ok thanks, hope someone help me

[hollanda]

Maybe you have make the hfm module virgin.
Then you need to learn the hfm back to car.
for this job you can use Renault Ecu Tool.
If you want to buy i can arrange one for you...

[TERMINATOR1000]

Hi everyone, I have a problem. I tried to add a key with renolink and now I have the car that doesn't even start with the first key. I have read that Renolink creates problems for hfm. How can I solve? I have vvdi, official ktag, but I don't have Reno ECU toll.
Hello
Game Over , contact R.E.T , AVDI owner in your city to reprogram HFM with OLD CARD & new card .

[davideopel]

It is on offer at 490 euros. But I have to fix it right away I look for who has ret in my area

[davideopel]

thanks for the reply, i'm trying with a passthru tool to connect to the renault network because i don't have renault ecu tool

[hefazath3]

hello my friend with avdi lonsdor keymaster dp or autel im608 u can program a card for clio 4 if it's all key lost you should read HF first then program a card with HF file

[davideopel]

I have a good card, but the problem is that Renolink has reset my hfm

[davideopel]

thanks to all solved with official Renault