View Full Version : citroen relay SID208
macmateusz
9th May, 2021, 08:19 AM
I would like to know by what protocol Ktag to read SID208 Citroen driver the same as Ford 2.2cdti. It just did not start - no communication with the ECU was flooded
macmateusz
9th May, 2021, 10:10 AM
Because the problem is that I can not find the ECU from Citroen, but the Ford after 2014 has the same engine and I wonder if I can match it from Ford
teerak2uk
9th May, 2021, 10:24 AM
I would like to know by what protocol Ktag to read SID208 Citroen driver the same as Ford 2.2cdti. It just did not start - no communication with the ECU was floodedFord & Citroen use different protocol
macmateusz
9th May, 2021, 10:32 AM
I only know if I can upload the software from Citroen to ECU from Ford are identical
macmateusz
9th May, 2021, 11:00 AM
SID 208
S180129101 D
SW 9678994180
HW 9676721380
Does anyone know what ECU will be compatible to make a clone
esse
9th May, 2021, 11:20 AM
SID 208
S180129101 D
SW 9678994180
HW 9676721380
Does anyone know what ECU will be compatible to make a clone
you cannot clone a sid 208 psa you must read the new ecu and modify the dump of the bcm
macmateusz
9th May, 2021, 11:39 AM
I've already had a few with the Ford Clon and they work on ori file, I don't know about Citroen
figani
9th May, 2021, 11:48 AM
Ktag clone can't read/write psa sid 208...
Ford yes, but PSA not...
User other tool for psa...
macmateusz
9th May, 2021, 01:21 PM
I have the original one, I just mean if he will read everything because I would like to use SID208 from Ford as a donor. Has anyone tried to use the SID208 from Ford as a replacement
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.