bmw ms43 !

[dzejkoff]

hello guys I am looking for file with ews off ms43 325i e46 why? I do myself in tunerpro and make a immo bypass but no crank so to be sure I one more time try write file from you guys and see what happens because I think this ecu is dead, If I turn a key I hear a fuel relay.
I think ecu don't have propely ground or something like that anyway like I said I am looking for file with ews off for double check.
I will be very grateful for any help.

regards :)

[erkor]

Hi,
Add your file ,we will check.

[dzejkoff]

here you are :)

[erkor]

I already have

[erkor]

The changes to the file looks good.
The cheksums are correct?
Ews is it removed from the car?

[dzejkoff]

yep I think this is ecu problem

[erkor]

Try this file >
807605

[immokill]

No crank?
Did you conect 1 and 3 pin on ews plug?
It must crank . Look at pins on ews that you have. 50 (+12v) while cranking on pin from ignition lock
Maybe you got bad ignition lock.
It must crank when ews is bypassed.
Maybe starter or ignition lock is bad.

[Lambda1]

Right. Such with removed ecu and bridged wires starter must run.

[dzejkoff]

Thanks guys for reply already buy ignition cube I check stater and starter is good I open and clean inside after that i put copper grease In some specific location. :)