tms 370 decoder

[busaman]

does anyone know the coorect wiring to power up sagem sl96 ecu for decoding with a tms370 decoder on the instruction i have pin 1=12v 2/3/18=ground 27/48= immo cut.

but pin 1&2 are injector outputs so that canot be right

also onthe drawing it has 29f512 plcc eprom but this ecu has 29f010.

[juisro]

Look datahsheet

[busaman]

sorry but i dont understand i need to power up the ecu sl96 to remove immo

[reda75]

ALL-FLASH-28F512-T-CLOCK.rar - 0.00MB (http://www.zshare.net/download/7194681075b67878/)
IMPORTANT!!!!!N.B PLEASE CUT THE PIN 48 IMMOBILIZER TO CONECTOR ANY ECU

PROCEDURE!!!!!!!

PROGRAMMING THE FILEALL-FLASH-28F512-T-CLOCK IN THE EPROM FLASH 28F512,
REMUVE THE EPROM FLASH ORIGINAL ANY ECU,INSERT THE FLASH ALL-FLASH-28F512-T-CLOCK
ANY ECU,TURN THE CONTACT KEY TO ON FOR 50 SECOND AFTHER TUN TO OFF,AFTHER
REMUVE THE FILE ALL-FLASH-28F512-T-CLOCK AND INSERT THE ORIGINAL FILE ANY ECU..

FINISH

[busaman]

i still dont understand what you are trying to tell me. with the tms sweeper you leave the eprom in the ecu and connect the sweeper to pin 22 with the ecu powered up, i need to know which pins on the ecu to apply power to.

[busaman]

if you scroll down to sl96 ecu you will see what i mean pin 1&2 are injector outputs

[gejzaslapka]

Hello,
did you solved this? I have the same problem with TMS374 ecu decoder- sweeper.

WBR
Gejzaslapka

[crashman]

SL96 ECU Pin
36-54 -GND
35-13 +12V
27-48 Immo cut

[anda2003]

Thanks this works well :)

[deneo]

is this the wiring for the sl96-9 thanks dene

[ROBERTby2000]

and for the sl96-1 ? because is diferent. i don`t find the 28f512
i find only the 28f256 :-(

[MSolen]

ALL-FLASH-28F512-T-CLOCK.rar - 0.00MB (http://www.zshare.net/download/7194681075b67878/)
IMPORTANT!!!!!N.B PLEASE CUT THE PIN 48 IMMOBILIZER TO CONECTOR ANY ECU

PROCEDURE!!!!!!!

PROGRAMMING THE FILEALL-FLASH-28F512-T-CLOCK IN THE EPROM FLASH 28F512,
REMUVE THE EPROM FLASH ORIGINAL ANY ECU,INSERT THE FLASH ALL-FLASH-28F512-T-CLOCK
ANY ECU,TURN THE CONTACT KEY TO ON FOR 50 SECOND AFTHER TUN TO OFF,AFTHER
REMUVE THE FILE ALL-FLASH-28F512-T-CLOCK AND INSERT THE ORIGINAL FILE ANY ECU..

FINISH

I have the same problem with P406 on the driver SL 96-1.Memory about the smaller capacity because 28F256, applying your cleaning file will settle of the matter and in this case?

BR
MSolen