Log in

View Full Version : BMW 328i Cabriolet 2008 CAS3+Bootmode


starmobile
11th May, 2021, 05:48 PM
:love-struck: Hi DK,i need help for CAS3+in boot mode module number: cas 61.35-9147185-01,VDO:5WK49514MBR so no ignition no communication after failed reflash with ISTA/P online so i open it and connect with VVDI Prog and read eeprom and flash if someone can help for restore communication i leave attachment,thanks in advance.
brend
11th May, 2021, 06:38 PM
You can try this one flash, not 100% same but maybe help...........https://www.digital-kaos.co.uk/forums/showthread.php/758520-Cas3-0l15y
starmobile
12th May, 2021, 02:42 PM
:love-struck: Hi DK,thanks to brend for files but i made a test writing flash but same problem and after i writing eeprom but no communication if someone can check if the problem is eeprom or flash if not plroblem i think than the hardware is defective,thanks.
starmobile
14th May, 2021, 06:53 PM
:tears_of_joy: Hi DK,i think than found problem so all the time i test for reading and writing the VVDI Prog MC9S12 adapter it was solding on bord i writing oem eeprom+other flash after i desolder all wires and test on car and car start and run i think than solder touch to other pin or adapter have internal resistor,problem solved thanks to all.