2012 E350 Bluetec - DTC off

[martinez9049]

Hello,

I read ecu 0 281 016 587 off MB 2012 E350 bluetec with Hextag. Attached rar file of P flash, D flash, and Ex flash. If someone can help me with these DTC off I would appreciate it. Thanks mates!

P0172, P2004, P042B

Ismael

[eimantuxx]

Pass PM after thanks+rep.

[momogsm]

Hi

Here You Are

Report Back

Thanks

[martinez9049]

awesome thanks guys! will try them...

[martinez9049]

Hi

Here You Are

Report Back

Thanks

Should I clear the CEL on the car before writing the modified file?

[momogsm]

Should I clear the CEL on the car before writing the modified file?
Hi

No Difference, Because In The Final The Dtc Are Disabled

Regards

[martinez9049]

Hi

No Difference, Because In The Final The Dtc Are Disabled

Regards

so for an update...the file from eimantuxx caused a dme issue for no start, weird, the one from momo worked like a charm. thanks again...

on a separate topic i also have a fault (system low pressure) for the adblue system that also causes the CEL to turn on. would disabling adblue in the ECU help? Or any ideas?

[momogsm]

so for an update...the file from eimantuxx caused a dme issue for no start, weird, the one from momo worked like a charm. thanks again...

on a separate topic i also have a fault (system low pressure) for the adblue system that also causes the CEL to turn on. would disabling adblue in the ECU help? Or any ideas?

Hi

Yes, Need Disabling Adblue+DPF, And Then No More Error.

Regards

[martinez9049]

Hi

Yes, Need Disabling Adblue+DPF, And Then No More Error.

Regards

Momo, Can you program out the fault error without disabling the system?


Sent from my iPhone using Tapatalk Pro

[momogsm]

Momo, Can you program out the fault error without disabling the system?


Sent from my iPhone using Tapatalk Pro

Hi

If The Car Is Not In Limp Mode, Then Post Your P Code, And I Will Disable It.

Regards

[martinez9049]

P20e823

Thanks


Sent from my iPhone using Tapatalk Pro