View Full Version : ford transit mk6 2.0 visteon DPC-806 how to clone?
sdnatlst
17th May, 2021, 12:40 PM
hi all, what can read immo data to transfer to new unit please?
is there an eeprom ? i cant see any normal ST chips here
thanks in advance
figani
17th May, 2021, 12:56 PM
hi all, what can read immo data to transfer to new unit please?
is there an eeprom ? i cant see any normal ST chips here
thanks in advance
chet this signed place on picture...
should be 77012...
read as 25010 or swap it...
sdnatlst
17th May, 2021, 01:01 PM
thanks so much! i will swap it if you are sure its 100% the correct immo eeprom :D
sdnatlst
17th May, 2021, 06:33 PM
Hi, its IC229A , labelled 77014C will it still be correct?
sdnatlst
17th May, 2021, 06:55 PM
trying to read with ATMEL 25010 and just reads as 00000's , with orange 5 programmer. eeprom seems glued to board not just soldered on
figani
17th May, 2021, 07:10 PM
Hi, its IC229A , labelled 77014C will it still be correct?
in the past I had it only with 77012...
not with 77014C...
just transfer it and try to start it...
than youŽll know more...
sdnatlst
18th May, 2021, 05:07 PM
hi, it was actually a ST 95040 readable chip, i read it and wrote to DONOR, will let you know if works
djollie
17th November, 2022, 04:33 AM
hi, it was actually a ST 95040 readable chip, i read it and wrote to DONOR, will let you know if works
did this work?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.