Transit 2015 spare remote

[Ecuprog31]

Hi all
ive tried to program remote for Ford Transit 2015 but the vehicule doesn’t enter in programming mode for remote
4d83 type on the pcb
the vehicule start no problem
I’ve tried 8, 4, 6 times on/off but doesn’t enter in programming mode
any help please
DTC in BCM is B10AB

[musti418]

Hello, if the transponder is on the control card, after the immo program is finished, manually code the remote.

[comizelu]

Hello, if the transponder is on the control card, after the immo program is finished, manually code the remote.Are you sure?

Sent from my MI CC9 Pro Premium Edition using Tapatalk

[musti418]

Are you sure?

Sent from my MI CC9 Pro Premium Edition using Tapatalk
hi, sorry for bad english. When I want to code these vehicles directly, the control is not activated manually. After the immo program, turn the ignition on and off, press the warning sound and control keys from the vehicle. the tool will detect it again. done.

[fred77]

Remote codes in on programming key.

Recommend u buy decent fob

[musti418]

hi, sorry for bad english. When I want to code these vehicles directly, the control is not activated manually. After the immo program, turn the ignition on and off, press the warning sound and control keys from the vehicle. the tool will detect it again. done.
I'm talking for the original key, not for older models with separate transponders.

[Ecuprog31]

If I make a XH remote also ?
but iam trying with original remote of the van
he has 1 key and it start but no remote and not enter in programming mode

[Weasel3]

If I make a XH remote also ?
but iam trying with original remote of the van
he has 1 key and it start but no remote and not enter in programming mode

At least for the Transit Connect. The XH remote did not work. Would not accept (at that time) a spare key. Tried a couple of months ago.

You try to do this with the old original OEM key?
Actually the key have lost the possibility, to synchronize the remote and module. Which have failed on the remote programming?

Or is it a new OEM key with integrated chip on the PCB?
(If this is the case, its more difficult. If the old OEM key give the problem, I would just try a new OEM key to program).

If the old key have been in the washing machine or in the sea. For a short while. These errors can occur several months later. Corrosion grows over time.

[mjoesen]

I tried to add a KeyDiy remote to a Ford Transit Custom 2014 that use the same key as Transit, but faild. It had to be learned at the same time as immo, like the old blue Transit remotes. Probably the same with your Transit.

But on Ford Transit Connect from same year (T17 chip), you could add a KeyDiy remote manualy in standard old Ford way.

[Rjautolocksmith]

1. Fasten seatbelt and close all doors
2. Turn the ignition from OFF to RUN 4 times within 3 seconds.
3. Turn the ignition OFF. The system will chime to confirm programming mode.
4. Within 10 seconds, press and hold any button on first keyless remote. The system will chime once to confirm programming

[Manta1600]

1. Fasten seatbelt and close all doors
2. Turn the ignition from OFF to RUN 4 times within 3 seconds.
3. Turn the ignition OFF. The system will chime to confirm programming mode.
4. Within 10 seconds, press and hold any button on first keyless remote. The system will chime once to confirm programming

Its not the full procedure between step 2 and 3 there is step 2.5 must say Abracadabra 3 times

[fred77]

Just say Abracadabra and magic happens.....