PDA

View Full Version : cummins insite problems help please



tictock
31st January, 2010, 08:12 PM
my insite will go down soon tried everything I can think off installing 7.3, 7.2, 7.1 all have same problems with key expiring feb 2010 any one have solution tried key gen and patch with 1-5 years to expire to no expire same problems I?ve tried different computers with clean install same problem
the only ver that will work is 6.52 with all options to me I think program 7.+ has a internal setting with keys for that date. Might be wrong please any help would be greatly appreciated

:pcguru:

mondao
31st January, 2010, 09:13 PM
I have the same problem and the man working full workshop

jasbo7
31st January, 2010, 09:13 PM
ask in the correct forum m8...garage section by the looks

servando
1st February, 2010, 12:15 AM
La versi?n 7.0 solo trabaja bien yo le baje de una versi?n de mi insite y no tengo problemas ,,,,,,,,,,, expiraran solitario versiones 7.2 en adelante

Solo Desinstala la versi?n que tienes y borra la carpeta Intelec y el 7,0 insite reinstala el PC-ID no cambia si no las tienes solo generador COPEA llaves que vienen en c: Intelec / segurite las licencias y vuelves a instalar

tictock
1st February, 2010, 01:20 AM
I've tried 7.0 when it was released and had issues with some diag test and there was some other issues also cant remember that was years ago unless they have a update for that ver

jctech
8th February, 2010, 05:20 AM
my insite will go down soon tried everything I can think off installing 7.3, 7.2, 7.1 all have same problems with key expiring feb 2010 any one have solution tried key gen and patch with 1-5 years to expire to no expire same problems I’ve tried different computers with clean install same problem
the only ver that will work is 6.52 with all options to me I think program 7.+ has a internal setting with keys for that date. Might be wrong please any help would be greatly appreciated

:pcguru: If version 6.5.2 works, then install that version and use the keygen to register with a date a couple of years in the future.
Then install version 7.x, it will pick up the expiry date of 6.5.2, even after you have uninstalled 6.5.2, as long as you do not delete anything, only uninstall and then reinstall the latest version

servando
9th February, 2010, 03:29 AM
i have insite 7.0 and work fine no expire. only version 7.1 and up

superc0
14th February, 2010, 07:43 AM
i have insite 7.0 and work fine no expire. only version 7.1 and up


servando,you can share with us this version?

chewin
19th February, 2010, 06:32 PM
Solucion:

Descarguen el archivo MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=MTFKYMOL)

Luego substituyan el archivo SecurityLicenses.xml en C:\Intelect\INSITE\Licenses y listo.

Solution:

Download the file MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=MTFKYMOL)

Replace the file SecurityLicenses.xml into C:\Intelect\INSITE\Licenses ready.


Todo el credito es para joshuav. GRACIAS JOSHUA.

samirabadon
20th February, 2010, 03:12 AM
La versi?n 7.0 solo trabaja bien yo le baje de una versi?n de mi insite y no tengo problemas ,,,,,,,,,,, expiraran solitario versiones 7.2 en adelante

Solo Desinstala la versi?n que tienes y borra la carpeta Intelec y el 7,0 insite reinstala el PC-ID no cambia si no las tienes solo generador COPEA llaves que vienen en c: Intelec / segurite las licencias y vuelves a instalar

Ya no me valida nada, le naje hasta la version 6.3 y ahora no me valida la contrase?a que tenia , la id es D61CD2E0

sca.net
13th August, 2010, 03:38 AM
Guys, who can upload the cummins 7.3 new keygen from carsoft sultan? or is it fake?

tyner130
13th August, 2010, 03:45 AM
I have used sultan keygen & everything I have gotten from him works.
Thanks from Ga.

sca.net
13th August, 2010, 04:33 AM
Yea i got a couple of keygens from carsoft sultan, and i was wondering if there is a keygen for cummins 7.3 in this forum, can you share?

devil dog
13th August, 2010, 04:53 AM
Yea i got a couple of keygens from carsoft sultan, and i was wondering if there is a keygen for cummins 7.3 in this forum, can you share?
Hey all this the one that I have hope it works for you.

servando
13th August, 2010, 07:28 AM
please my friend.....helpme

Product Name: Calterm III
Product Version: 2.7.1.008
Serial Number: 15290849
Update Number: 1

poopcraniums
13th August, 2010, 11:01 AM
ive reset my eurovox ex1100 usb to factory settings and now im stuck, any help please.

juanmnd
13th August, 2010, 03:11 PM
I have the following programs

caterpillar all programs
navistar all programs
perkins
mack
detroit all dddl, drs, ddcl

------------------------------------------------

Hola, principiantesv are any of these programs in spanish?

dimitar22
13th August, 2010, 05:40 PM
for the cummins unsite you have to do the following thing

it lowers the program of the following link

MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=EZIKU5TH)

after installing this program

add that he adds the cummins program and set a date before it expires

if the problem persists, set a date before it expires to the system install again the cummins, add it to the cracklook (program that is in the link) with the date that you have put to the system on having finished begins the computer again and before using the cummins, put the current date and ready you have the cummins without expiring is the same with incal


I have the following programs

caterpillar all programs
navistar all programs
perkins
mack
detroit all dddl, drs, ddcl
hino
isuzu idss
komatsu
allison
bendix
eaton
meritor
mitchell 1q2010
alldata 1q 2010
autodata 3.24
hyundai gds
kia gds
nissan super code
hyundai code
ford pincode
mitchell medium truck 2q2008
toyota epc full
mitchell ultramate
autoenginuiti 6.02 cracked
hunter winalign
john deere service advisor
peugeot wiring diagrams
renault wiring diagrams
snapon john been
subaru diagnostic
all nissan
vivid workshop data 4q 2009
tolerance data 1q 2009
autotech
vcads pro
vesis
wesis
etc.
etc.

You want to say that you will share those programs or you are selling them?

dieselman77
14th August, 2010, 10:11 AM
CAN YOU POST THE ISUZU, HINO AND NAVISTAR PROGRAMS AND TELL US WHAT THEY ARE ? OR ARE THEY FOR SALE AND NOT SHARE ? THANK YOU HAVE A GOOD ONE

joshplianfield
15th August, 2010, 09:36 PM
isuzu idss

mitchell medium truck 2q2008

john deere service advisor

PLEASE POST THIS FOR ALL TO SHARE THAT WOULD GREAT!:rolleyes:
As this is a sharing site not a selling site.

ziggystardust
16th August, 2010, 09:19 PM
my insite will go down soon tried everything I can think off installing 7.3, 7.2, 7.1 all have same problems with key expiring feb 2010 any one have solution tried key gen and patch with 1-5 years to expire to no expire same problems I?ve tried different computers with clean install same problem
the only ver that will work is 6.52 with all options to me I think program 7.+ has a internal setting with keys for that date. Might be wrong please any help would be greatly appreciated

:pcguru:
to set the date back

dafdiagnos
18th August, 2010, 04:19 PM
you need to be careful asking for keygens in this forum m8s, it could get you into trouble with the moderators or could get the site into trouble. it's best just to ask for someone to generate the keys you require

superc0
19th August, 2010, 05:25 AM
Hey all this the one that I have hope it works for you.

hi dear friend , welcome to dk, this file really works?:smokin:

zozi
30th August, 2010, 07:41 AM
Hi,
Could someone possibly help you to activate it.
many many thanks Product Name: Calterm III

Product Version: 2.7.1.008

Serial Number: 214597382

Update Number: 1

dimitar22
31st August, 2010, 03:24 PM
Hi,
Could someone possibly help you to activate it.
many many thanks Product Name: Calterm III

Product Version: 2.7.1.008

Serial Number: 214597382

Update Number: 1


you are in the wrong thread.

zozi
11th September, 2010, 02:10 PM
:banghead:Hi Guys,
I just bought a 2006 Cummins Intercept SPI2 [$ 175] to the circuit diagrams.
But the diagrams are only available server.
Except for wiring diagrams in it.
Someone could help me. Great need for a Power Generator Wiring Scheme QSX15 G8.
many many thanks in advance.

jackalfa
2nd October, 2010, 05:16 AM
I have this issue with 7.4 activaded by serials, for some reason when insite its connected to the ecm it changes from pro plus to pro ( with pro it don't let reset codes fault codes ) . I try it already reintalling, unistalling install again, going back to 7.3 same thing. Any ideas?

RSwire
3rd October, 2010, 01:20 AM
I have this issue with 7.4 activaded by serials, for some reason when insite its connected to the ecm it changes from pro plus to pro ( with pro it don't let reset codes fault codes ) . I try it already reintalling, unistalling install again, going back to 7.3 same thing. Any ideas?


I'm curently not using Insite 7.3 or 7.4 but did you try not putting in the pro# and only use the pro plus# and see if that does it? Just a thought.

dieselman77
3rd October, 2010, 01:34 AM
UNINSTALL THE PROGRAM AND GO TO THE START MENU WHERE THE SEARCH IS AND TYPE IN REGEDIT GO TO HKLOCAL AND CLICK ON CUMMINS AND ERASE ALL THE REGISTRATION KEYS AND THEN TRY AND REINSTALLING THE PROGRAM I THINK THE ACCESS KEYS WILL BE THE SAME BUT THEY MIGHT CHANGE I HAD TO DO IT ONCE OR TWICE AND IT WORKED FOR ME PLEASE TRY IT AND LET ME KNOW HOW YOUR MAKING OUT

servando
4th October, 2010, 12:30 AM
delete archive intelec in disc local C

AND REINSTAL INSITE WHITH KYES FOR BASIC ,LITE AND PRO

jackalfa
4th October, 2010, 01:03 AM
Thanks I going to try all this advices and let you know.
best regards

jackalfa
11th October, 2010, 10:28 PM
Hi, I tried all the advices, try it several things uninstalling all several times and reinstalled, nothing. Tried several trucks same result. I just install new OS winXP with fresh cummins installation and same thing. I used the the 7.2.0 crack but it's given me the same result. probably because I used the kg to make fleet and ecm pw removal keys and it's causing the problem.
Anybody have solid solution for this issue?
I'm going to try fresh OS and insite installation without the key and report.

mondao
12th October, 2010, 05:05 AM
try an older version
just use a key pro and calibration fleet, so works well for me

joshplianfield
17th October, 2010, 01:12 AM
I have this issue with 7.4 activaded by serials, for some reason when insite its connected to the ecm it changes from pro plus to pro ( with pro it don't let reset codes fault codes ) . I try it already reintalling, unistalling install again, going back to 7.3 same thing. Any ideas?

I don't believe the whole pro vs pro plus is the real problem here.

mine does the same thing, when not connected it says PRO PLUS and as soon as I connect it says PRO, Mine has been great, Are the codes you are trying to clear ACTIVE or INACTIVE? PRO gives you all access, its the highest level cummins usa uses, not even my freightliner or cummins dealer have ever heard of pro plus. If anyone knows the difference let us know.

With cummins you can not clear an active code, it must be repaired or resolved then it turns inactive then you can clear it. What code do you have?

Please let me know.

hercamp
17th October, 2010, 11:19 PM
I have this issue with 7.4 activaded by serials, for some reason when insite its connected to the ecm it changes from pro plus to pro ( with pro it don't let reset codes fault codes ) . I try it already reintalling, unistalling install again, going back to 7.3 same thing. Any ideas?

hey m8..from basic to up you can clear any INACTIVE CODE.

with pro ..you can change parameters only if the ecm is unlocked.

betwen pro and proplus is not too much difference ..in fact are same.

clear your inactive codes or repair the actives .:bandit:

Hanett
1st November, 2010, 10:03 AM
Hello everybody,
I need help with ECM database.
I use the Insite 7.3 but when I try to download the engine software I get this message:
The Calibration Database on this drive have expired and will be purged.

How can I solve it? The reinstall doesn't help.I have May 2010 Insite v7.3.

bravealikhatri
3rd November, 2010, 10:06 AM
Hello everybody,
I need help with ECM database.
I use the Insite 7.3 but when I try to download the engine software I get this message:
The Calibration Database on this drive have expired and will be purged.

How can I solve it? The reinstall doesn't help.I have May 2010 Insite v7.3.


You Must Change INCAL DVD

jctech
4th November, 2010, 12:33 AM
Hello everybody,
I need help with ECM database.
I use the Insite 7.3 but when I try to download the engine software I get this message:
The Calibration Database on this drive have expired and will be purged.

How can I solve it? The reinstall doesn't help.I have May 2010 Insite v7.3.
The InCal DVD is only valid for 6 months.
The September 2010 DVD will expire March 2011.
The May 2010 DVD expired in October

jctech
4th November, 2010, 12:34 AM
Hi, I tried all the advices, try it several things uninstalling all several times and reinstalled, nothing. Tried several trucks same result. I just install new OS winXP with fresh cummins installation and same thing. I used the the 7.2.0 crack but it's given me the same result. probably because I used the kg to make fleet and ecm pw removal keys and it's causing the problem.
Anybody have solid solution for this issue?
I'm going to try fresh OS and insite installation without the key and report.

What expiry date are you putting in the KG?
7.4 does not need dll replaced
Just use Pro, dont bother with Pro Plus

Edrenan1
4th November, 2010, 03:33 PM
Hi, i nedd ur help please, When i open Insite, inmidiatly come a square " insite start close " and never open.
What can i do ?
Thanks in advance

jctech
4th November, 2010, 09:57 PM
Hi, i nedd ur help please, When i open Insite, inmidiatly come a square " insite start close " and never open.
What can i do ?
Thanks in advance

Check your laptop will suit an insite installation,
Did you download from a reputable location?
[/URL]
uninstall insite and re-install
get 7.4 from here
[url]https://insite.cummins.com/insite/index.html (http://www.insite.cummins.com)

tonyspamone
18th November, 2010, 04:52 AM
Does anyone know what the latest incal disc is? I know we are in November but not sure if a November disc is available or when it will be. When do dealers receive their discs?

Thanks in advance

jctech
18th November, 2010, 01:17 PM
Does anyone know what the latest incal disc is? I know we are in November but not sure if a November disc is available or when it will be. When do dealers receive their discs?

Thanks in advance
InCal DVD's are not distributed every month. It depends if there are enough new calibrations or changes to make the issue of a new DVD worthwhile. Sometimes it is on the 3rd month, but usually each month or second month.

atrellum
26th January, 2011, 01:24 PM
hi friend where i can download version 6.3 please for torrent if is possible