AperoMyke
22nd May, 2021, 05:04 PM
Hi guys i would need some help testing a car launch check file ME7.6.2 Astra VXR(2500trm).
i am broken down with my kess v2 ...
can you posted a video :questionmark:
Thanks for your help :cool-new:
CWNMAXMD (8-bit) Codeword Drehzahlbegrenzung Set to 1
VNMX The vehicle speed for activating the raised (normal) rev limit. We set this as low at it goes (1.25 km/h) so the launch control shuts off as soon as you start moving off the line.
DNMAXH This is the RPM above rev limit when the fuel cut comes on. Tweaking this helps make more boost on the limiter. I use 50 RPM (Keep in mind the maximum RPM limit is NMAXOG + DNMAXH)
ITNMXH Dwell time under lower limit before activating the upper limit. We set this to 0 seconds
NMAX Ends up being the launch RPM. I've found 2500 RPM works well.
TMOTNMX Coolant temp for activating raised (normal) rev limit. We set this at -48 so that it can activate at any coolant temp.
TNMXH This is the time duration of the raised (normal) rev limit. We set this at it's maximum value
i am broken down with my kess v2 ...
can you posted a video :questionmark:
Thanks for your help :cool-new:
CWNMAXMD (8-bit) Codeword Drehzahlbegrenzung Set to 1
VNMX The vehicle speed for activating the raised (normal) rev limit. We set this as low at it goes (1.25 km/h) so the launch control shuts off as soon as you start moving off the line.
DNMAXH This is the RPM above rev limit when the fuel cut comes on. Tweaking this helps make more boost on the limiter. I use 50 RPM (Keep in mind the maximum RPM limit is NMAXOG + DNMAXH)
ITNMXH Dwell time under lower limit before activating the upper limit. We set this to 0 seconds
NMAX Ends up being the launch RPM. I've found 2500 RPM works well.
TMOTNMX Coolant temp for activating raised (normal) rev limit. We set this at -48 so that it can activate at any coolant temp.
TNMXH This is the time duration of the raised (normal) rev limit. We set this at it's maximum value