CAS3+ 6943836-01 0L15Y - flash file corrupted after update

[borysgo2]

Hi.
I have a CAS3+ 0L15Y on the table, the car is dead after attempt to program the key. EEPROM looks OK but the flash prapobly not. Does someone have a good flash file for 61.35-6943836-01 CAS unit ? It would be really helpfull.
Bellow some ori files from it.

Thanks.

[Agilechaveiros]

post photo of the sticker maybe i can really help you your flash is dead

[mobinec]

tray this flash file and report
which tool you use to make the key?
this file now i read for you 100% is ok same pass

[borysgo2]

mobinec
Ill try today for sure.
Bellow the label from the CAS unit.

Just in case I have a second CAS unit but ISN will have to be rewritten to it, how about it is encrypted ? Can ISN be swapped over ?

The tool to do the keys was ORI zed bull. Flashing stopped at about 90% and game was over.

Thanks

[pepi]

Hi.
I have a CAS3+ 0L15Y on the table, the car is dead after attempt to program the key. EEPROM looks OK but the flash prapobly not. Does someone have a good flash file for 61.35-6943836-01 CAS unit ? It would be really helpfull.
Bellow some ori files from it.

Thanks.

Write this dumps and let us know result.

[topclef]

eeprom is ok , flash corrupted
write this original flash , all will be fine

[borysgo2]

Report:
-mr pepi's eeprom - with taken off boot mode stuck
-mr topclef flash file
-car started OK
-CAS internal failure + lock pad on the dash
-reset ELV counter in CAS - the fault is gone
-programmed the key via OBD with autel in 10min

Thanks guys a lot.