im*o off ecu HELLA 4A0 907 473-B

[rockero]

Hello is need im*o off ecu hella 4A0 907 473-B AUDI A6 2.6 V6 any 1996. 27C256 memory DIL.
Thanks in avanceed.

[rockero]

Please, nobody knows anything about this immo? can be overridden or not?
Grateful if someone could give me information and if possible perform engine diagnostics with VAG-COM 01 ENGINE on this switchboard HELLA brand (can not be accessed)
4A0 907 476-B.
Thanks and regards.

[_DaLiBoR_]

Please, nobody knows anything about this immo? can be overridden or not?
Grateful if someone could give me information and if possible perform engine diagnostics with VAG-COM 01 ENGINE on this switchboard HELLA brand (can not be accessed)
4A0 907 476-B.
Thanks and regards.

Same problem with me. All controller accessible but not Engine ECU 01

[gizmo666]

i think this car have a separate immobox and k-line to engine ecu goes thrue the immo box.

You can do this car easy with immo emulator but then you need to disconnect original immo box from the car and connect emulator to original immo connector.

It is easy to do,because emulator have only 3 wires to connect(k-line,gnd,+12v)

Sorry my english but i hope at you understund what i mean;)

[didi_du_93000]

Hello,

Have you found a solution?
i have same problem.

[feles]

Same problem too. I think MCU problem in ECU.
Anyone have immo off solution?

[auto4]

i think this car have a separate immobox and k-line to engine ecu goes thrue the immo box.

You can do this car easy with immo emulator but then you need to disconnect original immo box from the car and connect emulator to original immo connector.

It is easy to do,because emulator have only 3 wires to connect(k-line,gnd,+12v)

Sorry my english but i hope at you understund what i mean;)


Thank you. Indeed the emulator works on that unit. I've tried it today. Only one account, you must remove the immobox and join wires W and K line before connecting the K emulator?s terminal.

Best regards.