Transporter 2019

[sisanovic1]

Hi guys, i have a vw transporter from 2019. I know its a aes transponder with uds remote. I programmed the transponder without any problems. I only have problems with the remote 7e .. BP is the remote number. I can not add new remote.

Someone told me that it is only possible to do it online with odis? Or only original remote will work.


Verzonden vanaf mijn iPhone met Tapatalk

[musti418]

Hi guys, i have a vw transporter from 2019. I know its a aes transponder with uds remote. I programmed the transponder without any problems. I only have problems with the remote 7e .. BP is the remote number. I can not add new remote.

Someone told me that it is only possible to do it online with odis? Or only original remote will work.


Verzonden vanaf mijn iPhone met Tapatalk
hello, try 5ko serial, code the remote separately, it will be keydiy.

[ghostrider72]

Is the adaptation channel open for remote programming in VCDS?

[sisanovic1]

Hi, i tried to program the remote seperatly. The 5k0 AD did not work. I try it with zeddfull and autel im608


Verzonden vanaf mijn iPhone met Tapatalk

[musti418]

Hi, i tried to program the remote seperatly. The 5k0 AD did not work. I try it with zeddfull and autel im608


Verzonden vanaf mijn iPhone met Tapatalktry to wipe the controls from memory.

[qeso705]

On pq25 add remote is 00 value in 01 or 21, its type of exception.

[sisanovic1]

If i wipe the ori remote, i think i will not be able to reprogram it? Its a risk


Verzonden vanaf mijn iPhone met Tapatalk

[Weasel3]

This car, if it is the same system as earlier models.
It would be able to program in 4 remotes.
I doubt the car has lost, 3 other keys since
2019.
So position 3 and 4, should probably work.
Without disturbing earlier programmed positions.

But if you delete all remotes.
And program it back again.
Its just important to program the remote, in to the right modul.
There is several systems, on different cars/models.
It depends on which tool is used, under the programming.

[p1et]

Remote should work automatically

[sisanovic1]

No, remote is separatly from the transponder in my key. I Used a aes transponder and a uds remote pcb. Also tried keydiy. If the transponder can be programmed, then the remote also has to be programmed.


Verzonden vanaf mijn iPhone met Tapatalk

[jacek77]

Remote should work automatically
transporter and caddy use a separate remote, I usually used odis for these and you don't need online for remote.

[sisanovic1]

Hi guys, it is fixed, needed a other key. Transponder and remote are programmed at once, not sepretaly. Just need the right key.


Verzonden vanaf mijn iPhone met Tapatalk

[p1et]

Like I said :)

[musti418]

hello p1et, in some models uds aes, sometimes mqb aes can be output, right?

[Manta1600]

The remote part on the uds and mqb is the same - I never tried but I'm prity sure that you can program MQB remote from Golf 7 on Golf 6

So the only problem is - is it the remote chanel is open for programming or not

[fred77]

No remote channel isn't open.
Fobs changed from BH in 2019. Key & remote programmed same time now.


Yes never thought of trying a Golf 7 key as different style and customer said must look same

[sisanovic1]

Thanks guys for the help and anwsers!


Verzonden vanaf mijn iPhone met Tapatalk