Newmotors
3rd June, 2021, 05:50 PM
Hey tuners , I need some guys to help me on a project ....
I have a peugeot 308 THP which original has 175hp,
Your modifications are:
downpipe
catback
candles thp 275 8degrees
42x45 Precision Turbine
stainless steel pressurization
larger intercooler
Fluter turbine valve
you can see that my first posts right when I entered the forum were about this car.
I studied a lot about winols in recent times. I'm only 21 years old and I grew up in the workshop, I've always been very proud of what I do.
I managed, with a lot of sweat, to reach 265Whp on the engine
and 37kgf
With 1.2 bar peak pressure only.
the fuel is just gasoline, but I'm trying to pass it to E100, I increased its point to increase the AF of the system, and specified the pressure to 1.8 bar, but it goes up and the car is giving a misfire in high, I don't know if I need to go ahead over the point and on the pressure I checked everything, there are no leaks and the turbine is new, the defective valve was replaced and nothing of the ~~~~ing pressure.
can someone analyze my map and help me with my toy
thank you to those who read it to the end and paid attention to it!!!!
I have a peugeot 308 THP which original has 175hp,
Your modifications are:
downpipe
catback
candles thp 275 8degrees
42x45 Precision Turbine
stainless steel pressurization
larger intercooler
Fluter turbine valve
you can see that my first posts right when I entered the forum were about this car.
I studied a lot about winols in recent times. I'm only 21 years old and I grew up in the workshop, I've always been very proud of what I do.
I managed, with a lot of sweat, to reach 265Whp on the engine
and 37kgf
With 1.2 bar peak pressure only.
the fuel is just gasoline, but I'm trying to pass it to E100, I increased its point to increase the AF of the system, and specified the pressure to 1.8 bar, but it goes up and the car is giving a misfire in high, I don't know if I need to go ahead over the point and on the pressure I checked everything, there are no leaks and the turbine is new, the defective valve was replaced and nothing of the ~~~~ing pressure.
can someone analyze my map and help me with my toy
thank you to those who read it to the end and paid attention to it!!!!