View Full Version : Connection from Cable to Dreambox
ptercook
11th October, 2008, 10:44 AM
What is the adaptor i need to connect the cable to my dreambox. the cable wire has like a satalite style adaptor on it and the dreambox is like an old school tv ariel adaptor.
thered
11th October, 2008, 11:16 AM
you need one of these m8
10 x F to Coax Adaptor Adaptors Starview Eurovox DBox on eBay, also, Cable Boxes, Satellite Cable Freeview, Consumer Electronics (end time 09-Nov-08 22:24:11 GMT) (http://cgi.ebay.co.uk/10-x-F-to-Coax-Adaptor-Adaptors-Starview-Eurovox-DBox_W0QQitemZ270285964960QQcmdZViewItem?hash=item 270285964960)
ptercook
11th October, 2008, 12:34 PM
Cheers ive got that now but when i automatically scan for channels i get
trying to find used transponders in cable network. Then it goes through all frequencies and shows failed for each frequency then after going through them all i get
error - failed to scan (error starting scan)
thered
11th October, 2008, 12:57 PM
Cheers ive got that now but when i automatically scan for channels i get
trying to find used transponders in cable network. Then it goes through all frequencies and shows failed for each frequency then after going through them all i get
error - failed to scan (error starting scan)
right m8 you need to input either 6.887 or 6.952 b4 you scan depending on area
just change as required
portbhoy
11th October, 2008, 01:37 PM
Or try a bruteforce scan, takes longer but then you'll pick up whatevers there :cool:
thered
11th October, 2008, 01:46 PM
what image are you using m8
ptercook
11th October, 2008, 03:05 PM
what image are you using m8
hi mate, im using Gemini v3.8 for DM800 downloaded from the downloads section.
thered
11th October, 2008, 03:11 PM
what cam are you using
ptercook
11th October, 2008, 03:15 PM
what cam are you using
not sure i dont think i have one installed? where would i get one ?
thered
11th October, 2008, 03:17 PM
try this
RapidShare: Easy Filehosting (http://rapidshare.com/files/152978682/e2-evocamd_2.17_071231.tar.gz.html)
ptercook
11th October, 2008, 03:21 PM
very much appreciated, so i just ftp these into the relevant folders and restart the db?
thered
11th October, 2008, 03:22 PM
install via ftp to usr/temp
then blue button on remote addons/manual install click ok should install
then go to top change cam to evocam 2.17 should be ok
by the way install as it is the box will unzip it i made this mistake
ptercook
11th October, 2008, 03:32 PM
legend!!! its working
ptercook
11th October, 2008, 03:33 PM
any tips on what plugins skins are useful to a newbie?
thered
11th October, 2008, 03:33 PM
glad you sorted m8
thered
11th October, 2008, 03:37 PM
any tips on what plugins skins are useful to a newbie?
dunno really m8 im learning myself and im not networked up yet so i couldnt really advise plus i havent got your box ive got a 7025
but have a read about m8 theres plenty you can do
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.