Clio EDC 15VM+

[cata13]

Hello.
I have a 1.9 DTI Renault Clio engine with Bosch 0281010501 ECU.
I read the 24C04 eprom and the file seems very small.
WinOLS can't detect any maps.
I want to increase the power, make IMMO OFF and keep EGR.
Can someone help ?

[elektronik325]

Hi Friend. Your must flash ride it egr off. No eeprom. Flash is 29F400

[cata13]

You mean flash via diagnose when it's powered up ? The whole ECU ?
And i want to keep EGR, need immo off and more power.

[elektronik325]

Friend. Maps are saved in flash. So if you want more power. Or turn off EGR. Or, turn off the DTCs. It is all stored in Flash ecu. That's why winols didn't see any maps. Because they are not in the eeprom. And he can read flash with Galleto. Or Kess. Or desolder and programmer on the table.

[cata13]

I understead.
Can I read with just the KLine of ECU ?
With Derelek interface ? VAG K ?
What interface ?

[elektronik325]

I don't know this interface. But you can try to see if it will read flash to you. Here you have the eeprom immo off. Give thanks and reputation and password to prive.

[cata13]

So, immobiliser IS in this file.
What other datas are in the eprom ?
I have almost done the derelek diagnose. Just have to plant components on PCB.
One more thing: this diagnose connects to serial port and from obd to K and L lines. Can be used with Renault DDT2000.
Thank you.

[elektronik325]

You have driver and immobilizer data included in the eeprom. This is a CPU cache. And Flasz is a program structurally. Maps and doses etc. Yes The K-line zto is the same as for diagnosis. And connecting the tester with the ECU.