urgent zafira psg16 pin

[ziko]

smok say pin 2263 but wrong code says opcom and smok when try reset ecu
as i see dump code is ok
can someone check

[Gammoudi]

pin .................2263 check security time

[ziko]

No sec time
When enter pin says wrong pin both smok and opcom, it has little wait time after that but not increase if put another's wrong code
In immobiliser dtc engine request present

[janusz21]

friend vin in the pump is from vectra c not zafira

[brend]

Wrong File Size! Must be 19660B




No sec time
When enter pin says wrong pin both smok and opcom, it has little wait time after that but not increase if put another's wrong code
In immobiliser dtc engine request present

[ziko]

I read with smok,
Yes vectra c is pump,said me servicer, can't be installed on zafira 2.2?
But pin is 2263 , why opcom says wrong pin,also smok, carprog when read data in pin field is xxxx

[janusz21]

look this problem meyby bad reset , carprog only pin reed corect testing many times, but we use op com or tech2 to reset

https://www.digital-kaos.co.uk/forums/showthread.php/651013-Problem-with-PSG16-reset-programming?highlight=psg16

reset pump carprog may damage the contents

[janusz21]

pump vectra c to zafire psg16 need bdm ori copy to pump used , or sps tech2 vin zafira

[Shmortz]

need to do SPS to work with correct calibration with zafira VIN using TECH2 and TIS then you can learn immo, Vectra C is working on CAN only, Zafira is K-line and using CAN only for ESP.

[ziko]

I readed via K line,smok...I also always read pin only with smok and reset with opcom

[brend]

Get pin code dump away possible.
Just need load dump right size,that's it!