tacho pro v 2008

[iragearhead]

Can any one tell me who originated the tacho pro. I bought a china knock off not knowing much about the system. This is my first posting. I am a 25 year exp. ASE multi master tech W/ background in electronics. The clone did not come with enough tech info to use it. ANY help would be marvelous. I would be willing to set up information base if I can get the info to index. Thanks in advance

[yasser]

Did it work, or not work.
What message it give on screen.
Tacho pro is workin under clear DOS.
Also not on too fast computer.
Check file atributes after copy files from CD to HDD, if attrib are market like "Read only", you have to clear this sttribute.
TahoPro is working great on some cars, like VW (Golf 4 without BOO dashes, maybe all Passat 4, some Passat3), Audi ( exept A4 with UK-NSI and some others), Mercedes( E class 95-2001, C-class after 06.96y, A class about 98-00y ...), BMW(most of models ecept E36 Compact, dashes with m35080), Ford Galaxy (same like VW sharan).

[iragearhead]

thank you for the info,my unit boots up and it will go thru menu. Any other tacho pro sites/forums or info?

[Air]

Hi! Try this one: :wavey:Download:

http://www.sinodownloads.com/down/download/PDF/super%20tacho.rar (http://www.sinodownloads.com/down/download/PDF/super%20tacho.rar)

Very helpful at first time. A lot of dashboard tips and pictures. Keep in mind, the Tacho software don't cover a lot of USA market cars. Please check a German section of that manual (in German language-use Google translate service) that explain a little more of.

[electromech]

Can any one tell me who originated the tacho pro. I bought a china knock off not knowing much about the system. This is my first posting. I am a 25 year exp. ASE multi master tech W/ background in electronics. The clone did not come with enough tech info to use it. ANY help would be marvelous. I would be willing to set up information base if I can get the info to index. Thanks in advance
Hello dont know what you really want above is the link to download the manual (thanks air?) and I have attached the original manufacturer for the tacho.......hope this helps abit



Digital odometer programming with the DIGA-Consult odometer programmer (http://www.diga-soft.de/odometer-programming.php)

[marincovich]

HI , I BOUGHT A TACHO PRO 2008 IN CHINA AND WORKS FINE. BUT I HAVE NO INFORMATION ABOUT CHEVROLET CARS, SPECIALLY S.10 AND BLAZER.THIS PICK UPS ARE NOT ABLE TO READ KM BY OBD CONNECTOR.DOES ANYBODY HAVE SUCH INFORMATION?? REGARDS

[rreisdorf]

Hi, I'm new to this and have a Tacho Pro v2008 that I'd like to use with a 2007 Jeep Patriot. The default software on the Tacho Pro v2008 doesn't have a choice for a Jeep Patriot, but I know that the Super Tacho v2009 works. Is there a way to update the Tacho Pro v2008 software so that it is compatible with a 2007 Jeep Patriot? Many thanks in advance for any information anyone can provide.

[chris_e36_328]

Hi everyone, I got myself tacho-pro recently (clone) to play with my E36, but I'm a bit stuck though. I run my old laptop from a DOS CD, the soft seems to be ok, box detected fine but I cannot get it to read my E36 ('98 coupe). Tried on an E39 and managed to get screen with a dump but call me daft I cannot work out what to do to get the E36 going. Pin 1&2 option doesn't seem to help much. All done via 20pin socket.

[marincovich]

What car do you have?

[alex1986]

One question about tacho 2008 .
i am working on a citroen c8 and it has 95020 chip so i used 35/95xxx board and clip to chip. but it point out that "DATA NOT EQUAL" . what's it means ?

[z786]

it means you are going to be a millionaire by next week
the 35/95xx board does not work and needs modification

[TULGEYWOODMAN]

It is not possible to do a good job with shit tool.

If you have tacho chinese shite, then stick to easy old jobs until you learn more and save more, then buy better quality tool.
An investment of say, ?7000 is a small amount to pay for a toolthat will pay for itself quickly, BUT, dont expect a ?200 chinese special to perform the same way!
Better buy a upa and learn how to programme the eeprom or micro manually using a calculator and your BRAIN.

[hcip]

you are right, Eric:congrats:

[Artjom]

i also bought the china version and i am quite happy.. it work ok for that price.. now going to buy the DP3 .. but the tacho 2008 works realy on many cars..

[madzar]

Buy labtool48 and read all eeproms,save them on your computer hen conect tacho clips.Mine Tacho erased a lot of eeproms.

[wiseman]

It is not possible to do a good job with shit tool.

If you have tacho chinese shite, then stick to easy old jobs until you learn more and save more, then buy better quality tool.
An investment of say, ?7000 is a small amount to pay for a toolthat will pay for itself quickly, BUT, dont expect a ?200 chinese special to perform the same way!
Better buy a upa and learn how to programme the eeprom or micro manually using a calculator and your BRAIN.

What tools do you recommend, cheap and expensive?
Cheers

[bill40]

did you figure it out,i also bought a knock off,its ok for older cars,but not for newer stukk,by obd2,mostly its dash out

[bill40]

whats a upa

[diga1]

tacho universal is very good tool if you work on cars up to 2006. for my opinion is better for beginner as upa becouse it is easy to use you have al manuall and many things you can do by obd or cluster plug. but as job goes on you will get upa and x prog m, vag dash com can, opel edc tool, fiat km tool by obd and so on and on, and whe you see that your busness is growing up to minimum 10 clusters a day then you will need tool for 10000E, but for now you take 1500E and buy all chinese tools and try for start. you cant do a couple of clusters and go and buy dp3 or engima , smok or somthing so expensive.
that is my opinion

[rafal]

I am using Universal Tacho v2008 and I am happy as well.

[markony79]

I am using Universal Tacho v2008 and I am happy as well.

How you do Golf6 with this???

[diga1]

you say to client that must leave car here and come back in twoo hours, then you go to your mate that has tool for this car he makes it you go back say a 20e; biger price then it costed you and you are happy and he is. but if you vant to know how first you must put eeprom c36 into service mode then you do it by obd

[markony79]

you say to client that must leave car here and come back in twoo hours, then you go to your mate that has tool for this car he makes it you go back say a 20e; biger price then it costed you and you are happy and he is. but if you vant to know how first you must put eeprom c36 into service mode then you do it by obd

Tell more and with what tool???

[gauch]

HI,

What will be best tool for US cars up to 2008?

[billykillkelly]

i bought my tacho 2 year ago newer done any job wia obd i'm just using it on some clusters as an hex calculator)))))

[wiseman]

Tell more and with what tool???

dp3 with update, and i think vag prog

[vahit]

How to model.tachopro 2004 Fiat Doblo 1.9 kilometers from lowering .. Can obd 2.

[pinkfloyd5eg]

hi guys, can someone please post a link for good website selling good Clips for TU , Chinese Clips are horrible lol

[konarg]

Can someone help me how to change milage on a dash saxo with tacho pro 2008 ? what connector should i use?

[wurz]

Can someone help me how to change milage on a dash saxo with tacho pro 2008 ? what connector should i use?

Peugeot 106 cable. Connections are in manual.

[konarg]

Peugeot 106 cable. Connections are in manual.

Thank you for your reply. i want to ask you somethink more becase i'm new and confused. in the manual that i download from here it saws cable that i must connect to the dash and the p106 is a cluster-plu. can you tell me wich is the p 106 cable or better can you upload a pic.

[Mijusa15]

Do you have cable nr.27 shematic. I have a problem with Opel vehicles VDO , I think the problem is in the cable

[hacko12]

Hi all mine tacho pro clone work fine on most of the cars but not on all from the manual but from yesterday my tacho pro 07/2008 have reading problem for 93cxx eeprom's, when i connect cable with 93cxx adapter and check connection from cable to adapter everything is fine but when i solder some 93cxx chip and try to read with tacho pro 2008/07ver. not working. Anyone help me what is the problem?

[sterling]

You need to change some chips on main board.

[bjondibike]

Hello I have a C203 2001 and I want to change the km with Tacho pro 2008
how can I do

[diagtech]

Tachp pro has problems with chips etc blowing even on original tool had two clones and from new they wouldnt do any obd jobs just use as back up to my original dashfixer