407 1.6 hdi EFR OFF

[roony75]

HI , i need help please dk
i need exit from LIMP MODE 3000 r/min
not just dtc off i try egr remover dtc gone but limp mode not
PEUGEOT 407 1.6 HDI 110 PS DPF

[Klaudas1331]

Try this solution,
pass in pm

[roony75]

Try this solution,
pass in pm

file not good engine not start

[morgano]

Try this solution,
pass in pm

file not good engine not start

This one should work.

If i were you i would get the advice implicit on the password ;)

Regards,

[eimantuxx]

Pass after thanks+rep.

[roony75]

This one should work.

If i were you i would get the advice implicit on the password ;)

Regards,

same problem egr dtc with limp mode

[stanislav georgiev]

test this solution

[elektronik325]

I'd say it's not the file's fault. Out of 5 files, one is probably good. First, unplug the plug from the EGR. Because often when it is damaged, you have limp mode. And two, blind him with a sheet of metal because maybe it is slightly open and you will have a problem with full power. Then check your files. Because otherwise it doesn't make sense. I've searched hundreds of these 1.6hdi.

[roony75]

I'd say it's not the file's fault. Out of 5 files, one is probably good. First, unplug the plug from the EGR. Because often when it is damaged, you have limp mode. And two, blind him with a sheet of metal because maybe it is slightly open and you will have a problem with full power. Then check your files. Because otherwise it doesn't make sense. I've searched hundreds of these 1.6hdi.

I did all steps , unplug egr & i blind hime withe sheet of metal , i try files winols payed & free solution & digital kaos help all the same broblem.
Maybe my original file not good .

[elektronik325]

It may be that someone has already done something in the file. I suggest you upload ori. After bdm. And then try it.

[stanislav georgiev]

It is very likely that the problem is not in what you think. Make a correct diagnosis

[roony75]

It is very likely that the problem is not in what you think. Make a correct diagnosis

i found just egr dtc with limp mode . from 800 RPM TO 3000 RPM NO PROBLEM

[Tawe]

i found just egr dtc with limp mode . from 800 RPM TO 3000 RPM NO PROBLEM

Here is 100% tested EGR Off solution.

[roony75]

Here is 100% tested EGR Off solution.

perfect no esp no egr dtc just injector code needed i did it car is good no limp mode rpm to max

thx for your help & all other friend

[Tawe]

perfect no esp no egr dtc just injector code needed i did it car is good no limp mode rpm to max

thx for your help & all other friend

Thank you for your feedback :)