RENAULT im*o EMULATOR......SORRY!!!

[rockero]

Hello and greetings, I need connection scheme for SIEMENS FENIX 5 renault im*o emulator, since I bought it in the manual CODECARD and do not understand very well in the section on ECU connection ......... . could help in the connection to the ecu?
Sorry for my English ..
Thank you and happy to be part of this forum !!!!!:hmmmm2:

[yasser]

Did you first clear ECU with Renault ECU Decoding tool ????
Then you can yuse it for emulatin good key, byt I think it will be not nessecery. After decoding just cut im*o line and try to start engine like always.

For sure for Siemens Sirius 32 and 32N you have to use ithis emulator.

[rockero]

Sorry, but I do not understand what you mean .. do not know if I've explained, I need is fenix5 connection scheme for connecting the renault immo emulator to decode and cancel the immo uce.
Sorry about or I have not explained well.
Thank you.

[yasser]

Ok, now I understand.
You need Renault immo decoder manual.
Ok.


Or if you talking about immo EMULATOR, what is diferend, so if it is with 7805 then you can connect in wire plug, yellow +12v, black -12v, and cut k-line between ecu and car and connect this part from ecu to k-line signal from emulator.

[lissbox]

Hello and greetings, I need connection scheme for SIEMENS FENIX 5 renault im*o emulator, since I bought it in the manual CODECARD and do not understand very well in the section on ECU connection ......... . could help in the connection to the ecu?
Sorry for my English ..
Thank you and happy to be part of this forum !!!!!:hmmmm2:
manual rus

[RunRabbit]

You'll need to virginise the ECU so that it's like it has just come from renault, it won't have an immob code stored and then you can pair it with the immob emulator.

The emulators are connected to ignition, ground and the immob line after it's been virginised.

I can virginise Renault ECU's and fit emulators if interested.

Here is the immob emulator guide

http://www.tek-tronics.co.uk/zip/PIC_Emulator_General.pdf

[vevepatronu]

You'll need to virginise the ECU so that it's like it has just come from renault, it won't have an im*ob code stored and then you can pair it with the im*ob emulator.

The emulators are connected to ignition, ground and the im*ob line after it's been virginised.

I can virginise Renault ECU's and fit emulators if interested.

Here is the im*ob emulator guide

http://www.tek-tronics.co.uk/zip/PIC_Emulator_General.pdf


do you have a scheme and dump of a working emulator?

[RunRabbit]

do you have a scheme and dump of a working emulator?

Sorry mate, I didn't build it, I bought it from HERE (http://www.therealdigitalsolutions.com/index.htm)

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/IMG_0500.jpg

If you tell me how I can possibly get the info you need.

[vevepatronu]

this one here is the renault decoder not the emulator... how much did you paid for it?

[vevepatronu]

@RunRabbit have a question for you, does the pcb of your decode is double sided or single side? can you make some quality pictures of both sides?

[RunRabbit]

this one here is the renault decoder not the emulator... how much did you paid for it?

Sorry, miss-read your post

Next time I get an emulator in I'll give you a PM as I don't know how to do dump it on my own.

?70 for the ecu decoder.

[RunRabbit]

@RunRabbit have a question for you, does the pcb of your decode is double sided or single side? can you make some quality pictures of both sides?

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/DSCN1055.jpg

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/DSCN1053.jpg

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/DSCN1052.jpg

Excuse the quality, I'm no David Bailey

[vevepatronu]

@RunRabbit m8 please read post #10 and help me a little...

[vevepatronu]

you was fast m8, please take the pics vertical so i can see the traces of the pcb. thanks
the quality is pretty good only the angle ....

[RunRabbit]

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/DSCN1064.jpg

http://i51.photobucket.com/albums/f360/Clio16v-widetrack/DSCN1057.jpg

Sorry about the quality I'll get some better ones in the daylight tmrw

[vevepatronu]

ok m8 thanks, i can see some things here, but if you can do tomorrow more pics will be great. thanks once again

[RunRabbit]

ok m8 thanks, i can see some things here, but if you can do tomorrow more pics will be great. thanks once again

No worries, I'll even draw you a little doodle :)

[adam28]

Checke here, dont know if it will help.

http://www.digital-kaos.co.uk/forums/attachments/f115/8679d1261901812-renault-immo-emulator-schematics-ren-emulator-schems.rar

[vevepatronu]

i've seen that already m8.... but are not so good...

[adam28]

i've seen that already m8.... but are not so good...

I have never tested it myself,to see if it works.

Cheers mate

[sideeffect]

Are you looking for something like this?

Got the files from this forum. contains everything pics, part list, dump setup etc

[PierreTheron]

Hi
Is there anyone that got this tool built and working 100%:bounce:

[treo]

Hello and greetings, I need connection scheme for SIEMENS FENIX 5 renault im*o emulator, since I bought it in the manual CODECARD and do not understand very well in the section on ECU connection ......... . could help in the connection to the ecu?
Sorry for my English ..
Thank you and happy to be part of this forum !!!!!:hmmmm2:
If you want do Immo off on Fenix 5 no need any tool just 1 wire conected to eprom.

[MSolen]

What you mean m8. I always use the decoder to this driver. What other way is ? can you describe it ?

[beloforte]

http://www.sendspace.com/pro/dl/gsv8np
emulator renault

[beloforte]

http://www.sendspace.com/pro/dl/gsv8npgotariad to know the microcontroller it already comes ready for use?

[treo]

What you mean m8. I always use the decoder to this driver. What other way is ? can you describe it ?
Solder one wire in eprom pin 22,put ignition on position 2 and triger positive impulses on pin 22 until injection lamp on instrument cluster is off,and job done.

[carsolution]

Hi guys.
This immo emulator shared here by our friends is intended to work in all renault cars?
Even Renault Space for 2003?
I think it has edc15c2 or c3 with 3 plugs.
Tomorrow I will order the electronic components and build one.
After I receive the components and build one to test I will let you all know if it works or not.
Its very easy to build.
Regards,
Nuno

[carsolution]

Anyone has schematic for the Renault immo off programmer.
This one is very useful and if I can build it I could share with all the result, I dont have any schemas of it.
If anyone has them please share it here and I will test it and let you know.
Regards,
Nuno

[ipejasinovic]

Hi guys.
This immo emulator shared here by our friends is intended to work in all renault cars?
I'm not sure about cars, but this is ecu list:

Petrol
SIEMENS FENIX3
SIEMENS FENIX5
SIEMENS SIRIUS32
SAGEM SAFIR (55pin)
SAGEM SAFIR2 (35pin)
BOSCH MOTRONIC MP7.0
MAGNETI MARELLI IAW 06R

Diesel
BOSCH MSA15.5 (DTI)
BOSCH EDC15C3 (DCI)
LUCAS DCU3R (1.9D)
Coded fuel cut-off valve ( 1.9D DDS )

[MOBILTRONIC]

Anyone has schematic for the Renault immo off programmer.
This one is very useful and if I can build it I could share with all the result, I dont have any schemas of it.
If anyone has them please share it here and I will test it and let you know.
Regards,
NunoProject of Renault decoding tool,...and that info,maybe is usefull.

[monini64]

how Renault decoding tool work?

[joaopereira]

which the tool for this car airbag off

thanks

[ecufix]

Does it work ?

[JFR-Tuning]

Solder one wire in eprom pin 22,put ignition on position 2 and triger positive impulses on pin 22 until injection lamp on instrument cluster is off,and job done.


If you want do Immo off on Fenix 5 no need any tool just 1 wire conected to eprom.


Hi,

please can you help.

Test this someone?

"Solder one wire in eprom pin 22,put ignition on position 2 and triger positive impulses on pin 22 until injection lamp on instrument cluster is off,and job done."

you are shure that you must positive Impulse to Pin 22 ? and don?t cut the wire to the immo linke you must do by the Sirius ( Twingo) ?

Thanks a lot Frank
:questionmark::questionmark:

[JFR-Tuning]

Please help, does someone have a manuel to immo off for a Renault Kangoo with Siemens Fenix5 ;; 1,4 8V Bj 1999

Can i take this with PIN 22 ?

Thanks a lot

[andy99]

Project of Renault decoding tool,...and that info,maybe is usefull.

and Hex for it?

[joujou12]

salem

I have only atmega16l SMD.I built this quicly.Ineed help for good dump


THANKS

[diagnosticman]

hello friend, sorry for my late question; can tell me someone where i find the dump for atmega16 for renault ecu decoder? and for renault immo emulator? many thanks