PDA

View Full Version : Need help with MS41.1 immo/ews off


looneyman
30th June, 2021, 08:49 PM
Hello DK members, I patched the ews, car cranks and won't start. Would appreciate if anyone could look into it and see where the problem is.
Original and immo off files are attached.
peechie
30th June, 2021, 10:35 PM
Both files seem to have EWS disabled, but i cant verify with a full read.

MPPS can read partial (24kb)
looneyman
1st July, 2021, 03:51 AM
I'll post partial read shortly. I am using MS41 Quick Flash
KriptoKey
1st July, 2021, 11:29 AM
Your file OFF
Lambda1
2nd July, 2021, 08:41 PM
Both files seem to have EWS disabled, but i cant verify with a full read.
Why? Fullread contains partial inside... look 14008 ... there is ews byte.
NBoth files seem to have EWS disabled, but i cant verify with a full read.
looneyman
3rd July, 2021, 05:17 PM
Same thing, cranks and won't start. The DME was good, came from a running vehicle. Tried another DME and the car cranks.
brend
3rd July, 2021, 05:43 PM
Wrong,first file without off second file done wrong.



Both files seem to have EWS disabled, but i cant verify with a full read.

MPPS can read partial (24kb)







Hello DK members, I patched the ews, car cranks and won't start. Would appreciate if anyone could look into it and see where the problem is.
Original and immo off files are attached.


Off done not good.


Here good worked sulution for your's flash.

If problem stay ,so or bad flash or hw or samething in another place.

Disconnect ews ,short starter wires then write flash put ecu in car and start.