arejas
6th July, 2021, 03:47 PM
Hello,have problems reading this ecu.Car is Volvo V70 2012yr 1.6 diesel D2 85kw.(Sid807evo)
Used Ktag 7.020 rework in germany by CP.All connections 100% ok(even perfectly soldered 3x boot and 1x CNF),tryed protocol 178 and 320 and instantly get micro protection removal failed error.
Used protocol P511 after 5mins of identifyng ecu i get micro protection removal failed or check ecu connection errors.
I used original tricore ktag cable and china clone tricore cable.
Used labaratory power supply(14v 2A)
Than used different power supply 13.5V and 5A
Tryed use different ksuite 2.25/2.23 sw,also tryed other ktag 7.020 unit and still same errors(micro protection failed or ecu connection error)
Please help,how to read this ecu with ktag,galletto v54 or kess 5.017?
Used Ktag 7.020 rework in germany by CP.All connections 100% ok(even perfectly soldered 3x boot and 1x CNF),tryed protocol 178 and 320 and instantly get micro protection removal failed error.
Used protocol P511 after 5mins of identifyng ecu i get micro protection removal failed or check ecu connection errors.
I used original tricore ktag cable and china clone tricore cable.
Used labaratory power supply(14v 2A)
Than used different power supply 13.5V and 5A
Tryed use different ksuite 2.25/2.23 sw,also tryed other ktag 7.020 unit and still same errors(micro protection failed or ecu connection error)
Please help,how to read this ecu with ktag,galletto v54 or kess 5.017?