FABIA 2013 NEC + 95320 ODO

[marek128]

Hi.

Need help with Dashboard Fabia 1.2i 2013 Johnson controls NEC + 95320. 5J0920801M

I tried: AVDI VVDI X-can(smok) OBD STAR

I damaged this cluster by AVDI and repaired ALL ok - be ware for this dash. Fix is easy, if someone hawe problem i can help.

Can anybody change millage for me in dump? Checsum is need for milleage. Send two dumps second hawe + 2.5KM (add by drive car)

OLD: 213328
NEW: 141100

THX.

[amar28]

Hi.

Need help with Dashboard Fabia 1.2i 2013 Johnson controls NEC + 95320. 5J0920801M

I tried: AVDI VVDI X-can(smok) OBD STAR

I damaged this cluster by AVDI and repaired ALL ok - be ware for this dash. Fix is easy, if someone hawe problem i can help.

Can anybody change millage for me in dump? Checsum is need for milleage. Send two dumps second hawe + 2.5KM (add by drive car)

OLD: 213328
NEW: 141100

THX.

OBD only, Dont think anyone can calculate manually

prepare dash + OBD

[marek128]

so u wana tell me only dp4? i seen posts here with calculate odo by 95320. When i drive some distanse and write back dump millage back before and stay.

[amar28]

so u wana tell me only dp4? i seen posts here with calculate odo by 95320. When i drive some distanse and write back dump millage back before and stay.


x-Tool, SMOK, Smelecom do this by OBD

If the mileage jumps back or doesnt change you need to do on Bench and flash dash first, Then by OBD and it works

this is the process for MM and Johnsons + 95320

[marek128]

what u mean flash on Bench?

[marek128]

I send u picture after try to change odo.

[amar28]

You just using the wrong tools, and that xcan looks like clone, use correct tools and you will do this job easy

[lupu_sandu]

AVDI can make this dash in no time via OBD or via dump (nec + eeprom)
Smok the same. make this dash in no time.
You are using xdash an old clone of smok and FVDI.
Use proper tools.
Also if you need mileage post NEC+eeprom

[marek128]

I waitnig for orginal smok. After try i write You about results.


BTW. How You spoted that i using clone?

[lupu_sandu]

Your picture clearly state old xcan, and AVDI can make this dash, so you don't use AVDI, juat a bad clone of that.

[marek128]

I hawe AVDI clone - damaged this cluster :D, smoks clone dont damage but not worked. Now i brought ori tool and we see what will hapen now :D

[marek128]

Ori smok uhds take 5 - 10 sec job done.

Thanks for advice.