W164 can blocker in dash

[joroflash]

Hi , mates !
How is connection diagram in this dash from GL W164 , no faund for this dash , on right can drosel or left , can1 from outside or can2 , where is Acc , the car is some far from me , thanks for your help !

regards , Joro

[Nicolas9]

that filter doesnt work on w164.

there are decent canfilter that do work (plug and play behind dash), but they are hard to get.

many tools can do this car without canfilter by obd.

[joroflash]

EM009 is such, from Abrites say the only difference is that it is without soldering , but no more info ... just pictures from EIS ... :uncomfortableness:

[Nicolas9]

EM009 is such, from Abrites say the only difference is that it is without soldering , but no more info ... just pictures from EIS ... :uncomfortableness:

you dont understand what i'm saying. listen carefully: your filter (both filter versions) are for w204/w176 etc., they dont work on w164..

buy decent tool to do car by obd.

[joroflash]

Ok ,Thank you, Nicolas9 !
i put in the dash and is working for km , but I think that it does not work well with the other components in the car, turn signals, headlights, etc. under. Remove filter , and now all working , odometer stay new , very strange

[Nicolas9]

Ok ,Thank you, Nicolas9 !
i put in the dash and is working for km , but I think that it does not work well with the other components in the car, turn signals, headlights, etc. under. Remove filter , and now all working , odometer stay new , very strange

not strange at all.
this means car has been done before (ezs blocked by flashing dash with decent tool).

[joroflash]

No , the car we try with digiprog , and see new km for too short time before they are jumped back . In the EIS i see exact orig km stay there till now