PDA

View Full Version : BMW DME EWS sync please



gelencserg
13th July, 2021, 05:35 PM
Hello!
Please help!
I want to sync DME and EWS3 BMW E46 2002
launch x431 doesn't do it
FVDi say is not possible
Please someone sync ...
Thanks!
822276

gelencserg
13th July, 2021, 05:37 PM
822277
Chk error...

morgano
13th July, 2021, 05:53 PM
Why not full bdm write ori content over donor ecu. Being same is a simple clone.... and should be in sync.

gelencserg
13th July, 2021, 06:15 PM
Why not full bdm write ori content over donor ecu. Being same is a simple clone.... and should be in sync.

Original ecu broken.
Only MPC and EPROM readable.
Flash cannot be read.

morgano
13th July, 2021, 06:16 PM
if ecu is same try only writting ori eeprom over donor

gelencserg
13th July, 2021, 06:22 PM
if ecu is same try only writting ori eeprom over donor

Tested...
Not work.
46D1 Control unit internal 4
4A63 ews tampering

kiszka
13th July, 2021, 07:42 PM
Tested...
Not work.
46D1 Control unit internal 4
4A63 ews tampering

new ecu flash Vin is CH20260

https://mega.nz/file/cq4UiQxb
if org ecu was working then donor eeprom should work
Program Vin in the new ECU

gelencserg
13th July, 2021, 08:31 PM
[QUOTE = kiszka; 4161713] new ecu flash Vin is CH20260

https://mega.nz/file/cq4UiQxb, (https://mega.nz/file/cq4UiQxb)


Ok!
Write, test and report...
Thanks!

gelencserg
14th July, 2021, 09:19 AM
new ecu flash Vin is CH20260

https://mega.nz/file/cq4UiQxb
if org ecu was working then donor eeprom should work
Program Vin in the new ECUWork.
Ews tampering dtc.
Sync with launch now all ok.
Start and run.
Thanks.