T5 2,5 TDI EDC16U31 Stage 1 remapping and P0299 delete

[JFR-Tuning]

I have trouble with my own car.
It have a new turbo but when i need full torque it goes into the emergency mode. It is missing 400 mbar boost by 2000 u/min up to 3000 /min. Can some M8 here help me please and switch off the DTC and emergency mode ?

also a Stage one

The turbo is new but i think not a good one

[geedot187]

i personally wouldn't delete a code for a map sensor just replace the map sensor
if its saying under boost then check for boost leaks

you can try this stage 1 made with speedweaver if you want and see if it runs better

checksum is corrected so write and go

password in inbox

[JFR-Tuning]

Normal yes m8
first check the boost
but i m in holiday with the car now. I read in Forum that a M8 make a longer hyterese timer for check the boost in soft

and a lot of test it and it runs fine. It it is not so much...only 400 mbar

so i think here are also a M8 who can do it