View Full Version : RangeRover 2018 JPLA-14D374-AD VVDI connection
teerak2uk
6th August, 2021, 10:16 PM
does anyone have VVDI connections for this pls
https://uploads.tapatalk-cdn.com/20210806/02b5779189e431438626154d615aa2e4.jpg
tepSIJA
6th August, 2021, 10:31 PM
14D374-AD Landrover
teerak2uk
6th August, 2021, 11:01 PM
14D374-AD LandroverJPLA is different board but this is carprotool connection which I don't have this tool
https://uploads.tapatalk-cdn.com/20210806/c42a83db5a6732a0717c4e8f87d80ffc.jpg
slick_dick
7th August, 2021, 11:43 AM
You gonna have a hard time reading that ecu with vvdi
but!
try this .......
br
slick
teerak2uk
7th August, 2021, 05:58 PM
Used smok JTAG in the end
slick_dick
7th August, 2021, 07:34 PM
i use same or cpt when its working lol
post crash if you need help.
teerak2uk
7th August, 2021, 07:44 PM
i use same or cpt when its working lol
post crash if you need help.Done crash I think ok just need to try in car on Monday
slick_dick
7th August, 2021, 08:02 PM
test it on the bench if you want
+12v - 19
GND - 12
CANH - 60
CANL - 59
ImDrug
18th September, 2022, 01:44 PM
Hi all! Tell me, I connect according to the scheme above to the control unit, but vvdi writes that there is no connection to the chip. What could be the problem ?
913493
hanchuman
21st October, 2022, 08:17 PM
питание внешнее к блоку SRS зацепил 12v?
sleiman
14th February, 2024, 12:00 PM
Used smok JTAG in the end
Hi, I just bought SMOK Jtag to read the flash of the same airbag module, but i tried with the smok photo connection and it didn't read, Can you please help me with the correct connection?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.