the box super usb lost channels

[lousund]

hello everyone, im brand spanking new to this. please, please be gentle.
i recently lost channels on my "the box super usb" and tried everything to try and retieve them, rescanning etc. the only thing i didnt do was "factory default" which i ended up doing. mmmm.....
i can now picture some of you sniggering, some may be shaking their heads in disbelief and some of you will be nodding in agreement as you have done the very same stupid thing!
i now have the luxury of watching a lovely plain blue screen... marvelous.
is it easy to reload this box with software and if so, is it all self loading etc and which software is the latest version. living in north east england on virgin media. give it to me straight, am i watching telly tonite or is my sat box destined for the wheelie bin? thankyou all in advance! cheers, neil

[unadkat]

hello everyone, im brand spanking new to this. please, please be gentle.
i recently lost channels on my "the box super usb" and tried everything to try and retieve them, rescanning etc. the only thing i didnt do was "factory default" which i ended up doing. mmmm.....
i can now picture some of you sniggering, some may be shaking their heads in disbelief and some of you will be nodding in agreement as you have done the very same stupid thing!
i now have the luxury of watching a lovely plain blue screen... marvelous.
is it easy to reload this box with software and if so, is it all self loading etc and which software is the latest version. living in north east england on virgin media. give it to me straight, am i watching telly tonite or is my sat box destined for the wheelie bin? thankyou all in advance! cheers, neil

hi mate

first of all was the channels working when u first got the box?

factory reset is fine... However you need to rescan again and you should get your channels back

after that press menu > 1570 > turn on Key code and click on set default key

exit 3 times and go to a $ channel and wait for code to update.


:champions:

[lousund]

hello, thanks for your reply. i have had the box from new about september last year and have had all the channels, though at times i did have to rescan to gain lost channels. at the moment when i switch the box on it lists which language (to which i select english) and then it goes to main menu and there is a list: INSTALLATION, CHANNEL SET UP, USER SET UP, SYSTEM SET UP and USB" have gone through all of the above and havent got any channels at all.
there is no "press menu > 1570 > turn key code ? etc options. its pretty much as blank as when i went to "factory default" proceedure. do i need to install software? thanks, neil

[lousund]

thanks unadkat, somehow channels have loaded in and followed your proceedure. much appreciated. WE HAVE TELLY!!!!!:thefinger:

[cactikid]

if you were scanning correct provider you should see channel names appear and by switching emu or keycode to on or enable and exiting out,box may have to update and picture will come back on.

[unadkat]

if you were scanning correct provider you should see channel names appear and by switching emu or keycode to on or enable and exiting out,box may have to update and picture will come back on.

thats true however alot of folks should technically press the '' set default key'' option which is provided.

So that the keys update from fresh.

Unles am Wrong..lol


Your welcome lousund... you owe me a Pint now ... lol

(Only joking)

:champions:

[lostgirl]

hiya im a new member on here.... sorry to invade this space but i really need some input. i have the box super usb.have had for about 8 months.was working fine yest. and today all we have are channels 1-5. i am in the east midlands. on virgin. i have done >menu.1570>key activation> on> have done automatic scan too. the signal is strong> but yet we got no channels. have heard that there might be a signal block to stop people with these boxes. i am just wandering if anybody knows a a way round this or can offer other advice. thank you.

[maca]

hiya im a new member on here.... sorry to invade this space but i really need some input. i have the box super usb.have had for about 8 months.was working fine yest. and today all we have are channels 1-5. i am in the east midlands. on virgin. i have done >menu.1570>key activation> on> have done automatic scan too. the signal is strong> but yet we got no channels. have heard that there might be a signal block to stop people with these boxes. i am just wandering if anybody knows a a way round this or can offer other advice. thank you.

try going to factory settings (0000)
press default key
auto scan
when done menu (1570) turn key code on
exit out to tv and let the box update.

[lostgirl]

hi i have done all that suggested earlier.and have done again after your reply but still not getting any other channels.:hmmmm2:

[wilf]

boxes all down in leicester leave it a while all should be restored later if not just rescan in a bit

[Raar]

Just a little update, Rescanned in LEIC at 07:55 and channels have returned!

[lostgirl]

i still dont have any of the channels what did u do to get them back?

[lostgirl]

rarr could you assist me in sorting the problem with box pls as we still do not have anything thanx

[alex21008]

All channels still down in Leicester :-(

[alex21008]

I have starview 4 - just updated to firmware 1.12 from 1.07, did a rescan and voilla! all channels back.. for now.

[toes1980]

HI all

Can anyone offer any help with sv combo lan.

[lostgirl]

lucky you alex i still have zero. despite doing rescans etc

[qpruleok]

check that you have latest firmware v1.12 and not 1.07 I had same problem, but loaded the v1.12 on box and was up and running with all ch's working

[lostgirl]

how do u check firmware? for the box super usb?

[lostgirl]

and also how do i load the lastest firmware if i do not have already?

[boomer39]

and also how do i load the lastest firmware if i do not have already?
do, menu,system info. if latest firmware is on, you will be ok.
if you have latest f/ware, you will be able to do menu, 1570 etc..

[lostgirl]

i am able to get the menu>1570> cas system etc.... key code is on.have done factory default settings and re scanned. but still nothing

[millergill]

I have the same problem with the same box :-( Doing every thing everyone has suggested.

Restore>English>Installation>AutoScan>N*L>1570>Keycode on>Set default Key>Go to channel with $>Check for Updates.(just stays on the update screen for 30/40 minutes.

Still not working in the Leicester Area it seems. I have a box downstairs that isn't a starview, Unsure of the make (because it's my old mans). And it's working perfectly.:hmmmm2:

[saint1970]

it seems really weird how the first starview is still working for me yet my starview 4 isnt, any reason?

[unadkat]

it seems really weird how the first starview is still working for me yet my starview 4 isnt, any reason?

yes rescan and it should start working!!! make sure u switch on the Key code

[daberto22]

I have starview 4 - just updated to firmware 1.12 from 1.07, did a rescan and voilla! all channels back.. for now.

How do u update firmware to 1.12? Im on 1.07. Im in Leicester and have tried rescanning etc but still nothing. Please help!

also how do u switch on key code? thanks in advance

[maca]

also how do u switch on key code? thanks in advance
turn key code to on menu press 1570 on remote and scroll down to key code and turn on..

[cactikid]

Digital Kaos - Downloads - Starview (http://www.digital-kaos.co.uk/forums/downloads.php?do=cat&id=23&sort=date&page=2)
check first if your box is a clone.
firmware underneath.

[daberto22]

Digital Kaos - Downloads - Starview (http://www.digital-kaos.co.uk/forums/downloads.php?do=cat&id=23&sort=date&page=2)
check first if your box is a clone.
firmware underneath.

How do i check if my box is a clone? Ive turned key code on but still nothing. Think i need 2 load latest firmware.

[cactikid]

How do i check if my box is a clone? Ive turned key code on but still nothing. Think i need 2 load latest firmware.
it is on that link i posted.
http://www.digital-kaos.co.uk/forums/downloads/starview/23/starview-4-depth-clone-guide-845/

[lostgirl]

i cant download that link. so can u jus tell me in brief how to get the latest firmware n whats needed?

[smirnoff_rules]

i cant download that link. so can u jus tell me in brief how to get the latest firmware n whats needed?

download from the links in my sig below

[mark wheeler]

Hi apologies in advance as Im not technically minded. My starview 4 has gone off and I have tried to restore from forum info ie factory default and menu 1570 however still no luck . You mentioned that you now have firmware and are back on. How do you get firmware ? is it something that has to be downloaded fom pc. Thanks
p.s Im from Leicester area

[unadkat]

Hi apologies in advance as Im not technically minded. My starview 4 has gone off and I have tried to restore from forum info ie factory default and menu 1570 however still no luck . You mentioned that you now have firmware and are back on. How do you get firmware ? is it something that has to be downloaded fom pc. Thanks
p.s Im from Leicester area

at the front of the box can you please tell me which box it is and I will guide you to the correct section and firmware.

Writing Starview 4 is just confusing and installing the wrong firmware will brick your box.

So check exactly which box you have post back with the exact name please mate.

:cobblers:

[daberto22]

I have the box super usb starview 4, cant download the clones pdf so dont know which firmware 2 get? can any1 help?

[cactikid]

try this one
Login (http://www.cable-closet.com/forum/index.php?topic=7685.0)

[lostgirl]

who ever can help me...please ok so my box has been down for almost 5 days now. no signs of life so to speak. the box is: the box super usb. there is no other brand name on there. have done everything to get back on. but have got no where. am in leicester. have connection through virgin. all reboot have been done. eg menu 1570 nagravision> key code. scan> still nothing. im totally lost...... so all advice welcome thanx

[cactikid]

what firmware is on box,menu-system info-ok ????

[daberto22]

I have v1.07 but dont want to get 1.12 til i know about this clone thing?...

[lostgirl]

system info is model c500
s/w version 1.05 Beta
boot version b-11

[Faz786]

Hi i have the box super, API version 8.02e_E, boot version 8.0, 30 Nov 2008. can anyone help me on how to get my channels back, some channels are working through NTL but i was using TW when all the channles were there before. thanks and tc. Help will be really really appreciated. Thanks once again.

[boomer39]

Hi i have the box super, API version 8.02e_E, boot version 8.0, 30 Nov 2008. can anyone help me on how to get my channels back, some channels are working through NTL but i was using TW when all the channles were there before. thanks and tc. Help will be really really appreciated. Thanks once again.
where are you? have you done all that has been suggested for days now? menu, 1570, emu on, press default, exit exit.etc.
what channels are missing?
try t/pest or other providers.

[chucklor]

Read my reply to "starview USB no sky sports 1 help" in the General cable TV section this should help you guys out who need to update firmware, it has sorted out about 20 or more boxes....chuck
This is not a fix for cloned boxes as quite correctly pointed out by Jok...

[daberto22]

but how do i find out if my box is a clone?!

[chucklor]

Yes sorry I agree Jok well pointed out I forgot to mention that m8, the ones I sold and maintain are genuine articles...chuck

[daberto22]

ok thanks i now know I dont have a clone, now help me download v1.12 with a link or something?! am grateful for everyone's help

[chucklor]

If you go to the downloads at the top of the page scroll down,click on the Starview section and on the left hand side, in most popular files is v1.12 m8..chuck

[kittyjan38]

hi
i have lost all my channels did the rescan and only got a few back,so i am loading the the 1,12 firmware its says its downloading been doing it for 2 hours and nothing is happening ,it says not to turn box of,can anyone help

[lostgirl]

hi jok you seem like you know what your doing so help me out. plllllllllsssssss my box super usb has been down for days now. we have nothing. it simply say the box super usb no other brand name have done all that menu>factory default> menu 1570> key code on> automatic scan> and zilch. madness it is so plsssssss helllpppp il be so grateful

[boomer39]

hi jok you seem like you know what your doing so help me out. plllllllllsssssss my box super usb has been down for days now. we have nothing. it simply say the box super usb no other brand name have done all that menu>factory default> menu 1570> key code on> automatic scan> and zilch. madness it is so plsssssss helllpppp il be so grateful
not you if i/we have asked, but is your cable still live? try putting it directly into a tv. also check scrt leads etc.

[lostgirl]

not you if i/we have asked, but is your cable still live? try putting it directly into a tv. also check scrt leads etc.


yes i have a live connection. the virgin box is working. but only got basic on that.so am using that cable.

[lostgirl]

I see you have v1.05 f/w on your box, you'll need to put v1.12 on there.

But have a read at post 48 before you go bricking your box.

JoK

hi i looked at the clone pdf. but im a girl and still confused. was that pic view form the front or hold it away from you. saying i think im ok to download 1.12 i just dont know where to find that firmware and what to do .x so pls talk me through much appreciated :stupido3:

[chucklor]

Lostgirl read post 51 this will tell you where to get the firmware...chuck

[lostgirl]

hi i looked at the clone pdf. but im a girl and still confused. was that pic view form the front or hold it away from you. saying i think im ok to download 1.12 i just dont know where to find that firmware and what to do .x so pls talk me through much appreciated :stupido3:

also jok ive jus tried download from the site downloads> starview.but all it brought up was 4shared site and file find???? so does that mean it has to look elsewhere for the firmware or is there an easier way???? :help:

[lostgirl]

Lostgirl read post 51 this will tell you where to get the firmware...chuck


chucklor m8 i found that page and attempted the download but all it did was take me 4shared and then said file not found. find file.

[lostgirl]

chucklor m8 i found that page and attempted the download but all it did was take me 4shared and then said file not found. find file.


it says TheboxSuperUSB_V1.12.BIN
and then asks to find file.

[chucklor]

When you get on 4free fileshare click blue option "download now"...

[lostgirl]

When you get on 4free fileshare click blue option "download now"...
thats what i did....

[lostgirl]

its the file that was uploaded by satsmo

[lostgirl]

and if you just save the file and try to open it doesnt work cos no components. and asks to locate on web?

[chucklor]

Yes that is the file, when you click download now " the blue option on 4 free shared, you will get a timer counting down after that it should give you the option in blue download now, click that and the file should download...chuck

[lostgirl]

Yes that is the file, when you click download now " the blue option on 4 free shared, you will get a timer counting down after that it should give you the option in blue download now, click that and the file should download...chuck
yes it downloads or so it says but fater that. it doesnt work .if i save the file wont open or the option to find the file comes up so both not working:questionmark: :help:

[chucklor]

Once you have downloaded the file you do not need to open it just transfer it onto a USB stick...chuck

[lostgirl]

Once you have downloaded the file you do not need to open it just transfer it onto a USB stick...chuck
ok will test it out thank you

[lostgirl]

yes it downloads or so it says but fater that. it doesnt work .if i save the file wont open or the option to find the file comes up so both not working:questionmark: :help:


thank you so so so very much you are a life saver me and the kids say a big thnx :angel:

[chucklor]

Another Happy Customer JoK, the funny thing is I dont even run a starview but a DBox2....Ken.:questionmark:

[daberto22]

i downloaded v1.12 and put it on usb drive. but when i went to download it onto box it said downloading and dont alter power but stayed on 0%! reckon try again or should i have done something different?

[mark36]

turn the box off at the back then connect usb stick,turn box back on and then try to download firmware.Thats if you arn't doing it that way.

[khadam]

Hi people

I have the box super super USB, lost majority of channels, tried firmware update but the execute file does not respond when i press ok, any suggestions??

[daberto22]

Ok back on! Thanks a lot to everyone who helped...on a smaller issue, does anyone know about getting the british version of espn which some premiership games are on? I just have american stuff.

[chucklor]

Have you tried a factory reset it should be there....

[boomer39]

Ok back on! Thanks a lot to everyone who helped...on a smaller issue, does anyone know about getting the british version of espn which some premiership games are on? I just have american stuff.
most of espn stuff is yankee c--p, but pl games will be on, 528 or 529 i think...

[thehood]

nagra 3.................

[unadkat]

nagra 3.................

have you recieved your brand new sealed Smart card from vermin yet???

:wink:

[boomer39]

nagra 3.................
swalk....XXXXXXXXXXXXXXXXX

[havenwood06]

I have all but a select few of channels back i.e. sports 1 and sky prem 2 still missing. I understand i need to update my firmware version which is currently 1.07 to 1.12. What is the process for doing this - i take it i need to download it onto a memory stick but then i am unsure about what to do?

Thanks

[BlueBox]

nagra 3.................

read my sig

[charb0y]

i've been running v 1.12 since august and its been fine up until a couple of weeks ago.

i've done a factory reset and re run 1.12, but only receive basic channels.

do i need to do something to the cas as well?

any help would be gratefully received

[cactikid]

i've been running v 1.12 since august and its been fine up until a couple of weeks ago.

i've done a factory reset and re run 1.12, but only receive basic channels.

do i need to do something to the cas as well?

any help would be gratefully received

have you read post 2??

[boomer39]

have you read post 2??
was going to reply to previous post, but sod it, give up, going to bed!!!!!!!!!!!!

[boomer39]

have you read post 2??
was going to reply to previous post, but sod it, give up, going to bed!!!!!!!!!!!!

[hans blix]

i have starvview 5 lost c*bc and cbe*bies

[Andy. W]

Hi all i have got a starview 3 box. I have lost all my channels today. i live in the manchester area. Has any1 got any ideas what i can do.

[chriskearn]

hi i have done all that suggested earlier.and have done again after your reply but still not getting any other channels.:hmmmm2:
hi most of my channels have gone down on 20/03/2010 I have starview usb and am in cheshire, I too have followed the abve procedures as well as codes, do I need to download v1.12. thanks for everybodies input.

[chriskearn]

hi most of my channels have gone down on 20/03/2010 I have starview usb and am in cheshire, I too have followed the abve procedures as well as codes, do I need to download v1.12. thanks for everybodies input.
just dowloaded version 1.12 for starview through usb dongle and im back up and running.

[Andy. W]

just dowloaded version 1.12 for starview through usb dongle and im back up and running.

Where do you download version 1.12 from. thanks

[Andy. W]

Try here m8 >> Digital Kaos - Downloads - The Box Super USB V1.12 (http://www.digital-kaos.co.uk/forums/downloads/starview/23/box-super-usb-v1-12-835/)

JoK


Thanks Jok. will this work on the starview 3 or does it have to be starview 3 usb. i think mine is just the starview 3.

Thanks

[sblane2]

Hi
New to this so please bear with me.
I have The Box Super USB and have recently lost channels now just get a black screen, I have tried everything on this forum ie factory reset scan and then menu 1570.
I have been told I need to update the firmware and have found a link to the files for this but I can not download the BIN files to put them on my memory stick to update the box.

Can somebody help with this please?
Thank you

[cactikid]

Hi
New to this so please bear with me.
I have The Box Super USB and have recently lost channels now just get a black screen, I have tried everything on this forum ie factory reset scan and then menu 1570.
I have been told I need to update the firmware and have found a link to the files for this but I can not download the BIN files to put them on my memory stick to update the box.

Can somebody help with this please?
Thank you
server had to update you first post in welcome section first before
you can download.

[juliegibson]

doze any one no how to get my boxs on in leicester

[cactikid]

Introduce Yourself (http://www.digital-kaos.co.uk/forums/f2/)

have you read the posts above ^^^^^^^^^

[boomer39]

doze any one no how to get my boxs on in leicester
YES, MR EFFIN BRANSON!!!!!!!!!!!!!!!!!!!!!!!!!!

[cactikid]

3.7Software is followed by ------- new cards then --------- Nag 3---------NO BOXES WILL WORK (apart for VM boxes)
3.7 Software is for VM boxes only NOT Starview etc

Areas already hit by Nag 3 are at the bottom of list
Current areas on 3.7

- Avon (Set to receive new cards as part of Staverton/Aztec headend)
- Aylesbury
- Barnsley (Receiving new cards)
- Basildon (Set to receive new cards)
- Basingstoke (Set to receive new cards as part of Reading headend)
- Bath (Set to receive new cards as part of Staverton/Aztec headend)
- Bedfordshire including Bedford Sandy, Biggleswade, Dunstable
- Belfast
- Birmingham (Set to receive new cards)
- Bradford (Receiving new cards as part of Barnsley headend)
- Brighton
- Bristol (Set to receive new cards as part of Staverton/Aztec headend)
- Cambridge
- Cardiff
- Casltford (Receiving new cards as part of Barnsley headend)
- Cheltenham (Set to receive new cards as part of Staverton/Aztec headend)
- Chesham
- Cheshire including Widnes
- Chesterfield (Set to receive new cards as part of Nottingham headend)
- Chiltern Hills
- Cleethorpes (Receiving new cards as part of Grimsby headend)
- Clydebank in Scotland (Set to receive new cards as part of Glasgow headend)
- Cotswolds (Set to receive new cards as part of Staverton/Aztec headend)
- Coventry
- Croxley Green
- Derbyshire
- Doncaster (Receiving new cards as part of Barnsley headend)
- Dorset including Bournemouth, Poole
- Dudley (Set to receive new cards as part of Wolverhamption headend)
- Dunbartonshire in Scotland (Receiving new cards as part of Edinburgh headend)
- Dundee in Scotland (Receiving new cards)
- Durham
- East Anglia
- Essex including Harlow, Romford, Ilford, Rainham, Dagenham, Waltham, Abbey, Loughton, Hornchurch
- Exeter (Set to receive new cards as part of Newton Abbot headend)
- Falkirk in Scotland (Receiving new cards as part of Edinburgh headend)
- Fife in Scotland (Receiving new cards as part of Dundee headend)
- Gateshead (Set to receive new cards)
- Glasgow in Scotland (Set to receive new cards)
- Gloucester (Set to receive new cards as part of Staverton/Aztec headend)
- Grimsby(Receiving new cards)
- Halifax (Receiving new cards as part of Barnsley headend)
- Hampshire including (Aldershot, Farnborough, Guildford set to receive new cards as part of Guildford headend), Gosport, Waterlooville, Havant, Southsea
- Hartlepool (Set to receive new cards as part of Teesside headend)
- Hertfordshire including Stevenage, Bishops Stortford Watford, Rickmansworth South Hertfordshire, Hertford, Hitchin, Letchworth, Ware, Hertford, Hoddesdon, Cheshunt, St Albans, Hatfield receiving new cards as part of Hemel Hempstead headend
- High Wycombe (Set to receive new cards as part of Reading headend)
- Horley
- Harrogate
- Huddersfield
- Humberside
- Immingham (Receiving new cards as part of Grimsby headend)
- Keighley (Receiving new cards as part of Barnsley headend)
- Kent including Bexley, Bexleyheath, Dartford, Swanley, Ashford, Dover, Folkestone, (Bromley set to receive new cards)
- Kidderminster (Set to receive new cards as part of Wolverhampton headend)
- Kirklees including Dewsbury, Batley, Mirfield
- Lancashire including Chorley, Burnley, Nelson, Accrington, Colne, Blackburn, (Preston headend 1 set to receive new cards)
- Leamington Spa
- Leeds
- Leicestershire including Loughborough
- Lincolnshire (Receiving new cards as part of Nottingham headend)
- Litchfield
- Liverpool (South Liverpool set to receive new cards as part of Preston headend 1)
- London 41050 including Harrow, Wembley, Lewisham, Hackney East London, (South London, Croydon set to receive new cards) Seven Kings, Acton London, Barking, Chingford, Shepherds Bush, Upton Park, Walthamstow, Hounslow, West London, Hayes, Heston, Hillingdon, North-West London
- Lothian in Scotland including Edinburgh (Receiving new cards)
- Luton
- Manchester including Swinton, Salford, Stretford, Wigan, (Ashton, Bolton, Burnley, Macclesfield, Runcorn, Stockport and Warrington set to receive new cards)
- Middlesbrough (Set to receive new cards as part of Teesside headend)
- Middlesex including Staines, Enfield, Northwood
- Newbury (Set to receive new cards as part of Reading headend)
- Newcastle (Set to receive new cards as part of Gateshead headend)
- Newcastle-under-Lyme
- Newport
- Newton Abbott (Set to receive new cards)
- Northamptonshire
- North Lanarkshire in Scotland including Motherwell, Bells Hill (Set to receive new cards as part of Uddington headend)
- North Shields
- Norwich
- Nottinghamshire (Receiving new cards)
- Oldham
- Oxford (Set to receive new cards as part of Reading headend)
- Paisley in Scotland (Set to receive new cards as part of Glasgow headend)
- Perth in Scotland (Receiving new cards as part of Dundee headend)
- Peterborough
- Plymouth (Set to receive new cards as part of Newton Abbot headend)
- Pontefract (Receiving new cards as part of Barnsley headend)
- Portsmouth including Cosham
- Reading (Set to receive new cards)
- Redditch (Set to receive new cards as part of Wolverhamption headend)
- Rotherham (Receiving new cards as part of Barnsley headend)
- Rugby
- Scun'thorpe (Receiving new cards as part of Grimsby headend)
- Sheffield (Receiving new cards as part of Barnsley headend)
- Solent
- Southampton
- Southend-on-Sea
- South Humberside (Receiving new cards as part of Nottingham headend)
- South Lanarkshire in Scotland
- South Port (Set to receive new cards as part of Preston headend 1)
- South Shields
- South Tyneside
- South Wales
- Stafford
- Staverton/Aztec (Set to receive new cards)
- St. Helens
- Stockton-on-Tees
- Stoke-on-Trent (Set to receive new cards)
- Sunderland
- Surrey including Guildford, Woking, Frimley, Farnham, Camberley, Epsom, Kingston Upon Thames, Caterham, Hersham
- Sussex
- Swansea
- Swindon
- Teesside (Set to receive new cards)
- Telford (Set to receive new cards as part of Wolverhamption headend)
- Thames Valley (Set to receive new cards as part of Reading headend)
- Tonbridge including Tonbridge wells, Edenbridge
- Uddingston in Scotland (Set to receive new cards)
- Wakefield (Receiving new cards as part of Barnsley headend)
- Walsall (Set to receive new cards as part of Wolverhamption headend)
- Washington - Tyne+Wear
- Watford
- Wearside
- Wessex
- West Bromwich
- West Sussex Crawley, Worthing
- Wirral
- Wolverhampton (Set to receive new cards)
- York



Areas switched/switching over to Nagra 3

- Acton London (NTL parts only)
- Ashford
- Aylesbury
- Barking
- Batley
- Bedfordshire
- Bexleyheath
- Bigglesworth
- Bishops Stortford
- Bournemouth
- Brighton
- Caterham
- Chesham
- Cheshunt
- Chiltern Hills
- Chingford
- Crawley
- Dagenham
- Dartford
- Derbyshire
- Dewsbury
- Dover
- Dunstable
- East Ham London
- East London
- Edenbridge
- Enfield
- Epsom
- Essex 1 (NTL/Excw parts only)
- Folkestone
- Gosport
- Harrogate
- Hatfield
- Havant
- Hayes
- Hemel Hempstead
- Hersham
- Hertford
- Heston
- Hillingdon
- Hitchin
- Hoddesdon
- Hornchurch
- Hounslow
- Huddersfield (NTL parts only)
- Ilford
- Kirklees
- Leeds
- Leicestershire
- Letchworth
- Loughborough
- Loughton
- Luton
- Middlesex
- Mirfield
- North-West London
- Northwood
- Parts of Hertfordshire (NTL)
- Poole
- Portsmouth
- Rainham
- Rickmansworth
- Romford (Excw parts only)
- Sandy
- Seven Kings
- Shepherds Bush
- Solent
- Southampton (Excw parts only)
- South Hertfordshire
- Southsea
- Staines
- St Albans
- Stevenage
- Sunderland
- Surrey (Within M25)
- Sussex
- Swanley
- Tonbridge
- Tonbridge Wells
- Upton Park
- Waltham Abbey
- Walthamstow
- Ware
- Washington - Tyne+Wear
- Waterlooville
- Watford
- Wearside
- Wessex
- West London
- West Yorkshire (NTL parts only)
- Worthing
- York

[juliegibson]

doze any one no how to get the boxs going ? in leciester

[cactikid]

read above nagra3

[devz_24]

Ive lost all my channels aswell and have no idea how or what i have to do to get them back. I have a starview hd combo box and jus get the basic channels at the min. Lost all the others

[buggie]

Hi Please be kind to me as im a bit silly when it comes to tech things. I live in Belfast and have a The Box Super and have lost all channels except 1-5. The channels have been switching themselves off daily and today they have now all gone. I have tried scanning and rescanning daily but nothing seens to help. Could somebody please help by telling me in the simplest terms now i might fix the problem and also what the default key is? Thanks

[belfastdaren]

scan on chorus insteas of ntl worked for me

[buggie]

Sorry but that did'nt work, I'm on Cable (NTL) does that make any difference? As I said I need the Dummies manual for these sort of things. Thanks

[belfastdaren]

im on ntl in belfast

[buggie]

I know you have fixed yours but were you having the same problems as I am?

[belfastdaren]

i had lost all channels the menu was stuck in the choose a lang option, so maybe its different lol

[kwame eric]

hiya i'm new on this site but i was wondering if any one could help me. i have the box super usb, it was working ok until three days ago when i lost all the channels. i still have the menu but no pictures i live in the essex area could anyone help?

[boomer39]

hiya i'm new on this site but i was wondering if any one could help me. i have the box super usb, it was working ok until three days ago when i lost all the channels. i still have the menu but no pictures i live in the essex area could anyone help?
ever heard of nagra3???

[lee707]

hi all can any1 help me im in belfast and have been losing channels over last week or so i managed 2 unscramble a few of them but cant get espn and a few other stations back can any1 tell me how i can! thank you

[surferman]

You are a star mate... It works brilliantly....
Thanks a million

[hatchi1987]

Hi all, the advice is all spot on, helped alot! cheers.
Just one thing though, how do i get the internet back? we lost it when we lost all the channels and it hasn't come back with the channels.........

[boomer39]

Hi all, the advice is all spot on, helped alot! cheers.
Just one thing though, how do i get the internet back? we lost it when we lost all the channels and it hasn't come back with the channels.........
internet thro your s/v box.... tell us more......

[dipuace]

need firmware for winchester please for sv4 and sv5

[hatchi1987]

we have an ntl modem, when we first set up the super usb box in september it worked fine with the internet functioning properly aswell. They we lost both the channels an the internet at the same time, after following the advice on here we have managed to get the channels back but no internet.
Im not that good wth stuff like this so i'm stuck on what to do next?
We have been told it could be the mac address.......?
any suggestions?
please help

[andysmith121]

how did u do it ?

[JOHNNNYYY]

PLEASE HELP ME SOME ONE i am searching the Audi concert code a time...
AUZ5Z3X0109622

[boomer39]

we have an ntl modem, when we first set up the super usb box in september it worked fine with the internet functioning properly aswell. They we lost both the channels an the internet at the same time, after following the advice on here we have managed to get the channels back but no internet.
Im not that good wth stuff like this so i'm stuck on what to do next?
We have been told it could be the mac address.......?
any suggestions?
please help
sounds like a prob with your pc or vermin... never had any interference with my b/b because of my sv box..give vermin a ring.. they cant trace your box back...

[boomer39]

PLEASE HELP ME SOME ONE i am searching the Audi concert code a time...
AUZ5Z3X0109622
wrong thread i hope or i've had too many beers!!!!

[hatchi1987]

sorry to sound like a div, but what do all those abreviations mean?

[j4yesh]

YouTube - Free TV??

[01021947]

all starbox's going down, new keys required,none available at present. so don't bin tour boxes

[leododd79]

Hi all
Sorry to sound stupid but just to recap. Are we all waiting for new software for the starview 5 after they issue the new cards.??

PLEASE HELP CHEERS

[boomer39]

Hi all
Sorry to sound stupid but just to recap. Are we all waiting for new software for the starview 5 after they issue the new cards.??

PLEASE HELP CHEERS
NO ...THERE WILL BE NO FIX!!!!!!!!!!!!!!!

[LesDude]

Got my new vm smart card today, any news on wether they knock out the channels, or any fixes, before I put it in??

[Razman0810]

Dont think you will get a quick fix at the moment as all boxes are going down.

[boomer39]

Got my new vm smart card today, any news on wether they knock out the channels, or any fixes, before I put it in??
normally takes about 2 weeks to go completely, they go off by movies, asian, ~~~~, sports etc.. no idea what order but they dont all go off at once...

do not expect a fix!!! start paying ,sad to say ............

[oddsandmods]

do not expect a fix!!! start paying ,sad to say ............

Or move over to CS on Satelite, nice dm800 ?199 or dm500 for around ?49 :rock:

[karamjeet]

i am in chesterfield area i am only getting some channels and all others channels ur black out, i have done factory resetting and code update going to 1570 but no luck

[cooky85]

help i have done the same mistake and lost everything so when i turn it on all i get is choose language

[cooky85]

i got the box super not usb lost my chanels done factory reset then lost everything when i turn it on i get the language screen tried scanning but dont pick anything up can u help maca

[cactikid]

did you try scanning all providers for a list of channels.

[painfullyboro]

how do i download firmware 112 for superbox 4

[moon71]

there is 1 other way to get a bit more viewing out of your boxes...move up here to scotchland.....they havent done us yet:idea::thrasher:

[Gregs80]

Haven't had most of my channels for a few days. I've done all the rescan, key on etc and nothing. I've had a look at the system info and it says its running S/W Version 1.07, I'm assuming this is firmware 1.07.

If I download the v1.12 file to I just load it onto a flash and select it open the file via the box? Sorry this may seem like a dumb question but, I haven't done this before.

Cheers.

[cactikid]

yes drag and drop,always have box powered off while inserting or removing usb,factory reset 0000 to delete auto scan and keycode enable.

http://www.digital-kaos.co.uk/forums/f10/areas-receiving-new-cards-93125/
if needed there is a tutorial in downloads link above in starview section.

[spinksy.g]

hi,
i have just lost a handful of channels (mostly music), can anyone help,
i live in middlesbrough and have received the new card, so i have installed the 1.12 on my box, but hasn't made any difference, dose that mean my superbox usb will not work?

[brogdenk]

:(Hi i hve lost most channels on starview 4 i have the latest firmware but nothing changed i live in leicester is there anything new i have to do i have done a factory default and reset key code and still nothing

[smirnoff_rules]

:(Hi i hve lost most channels on starview 4 i have the latest firmware but nothing changed i live in leicester is there anything new i have to do i have done a factory default and reset key code and still nothing

read below m8 ..

[joeyboy123]

it wont let me download anyfin on this site???

[jckw]

it wont let me download anyfin on this site???
you have to wait to download so have a good read for 15mins or so

[cloudnineuk54]

it wont let me download anyfin on this site???
it will if your patient and allow server to update

[boomer39]

hi,
i have just lost a handful of channels (mostly music), can anyone help,
i live in middlesbrough and have received the new card, so i have installed the 1.12 on my box, but hasn't made any difference, dose that mean my superbox usb will not work?
er ... yes... how did you guess????????????????

[strawman91]

hi
i have the box usb 2 (possibly a starview 5 not sure tho) and i have just lost most channels and am in nottinghamshire area also i have done a factory reset and re-scan wth keyode on and ive scanned all other providers but still no luck in getting channels back i still have most all movie channels except premier,premier +1 and crime and am missing 2 sports ones,also all cables are plugged in correctly and are working fine.If any1 has any solutions can u pm them me please.
Thnks chris

[jasmin10]

Hi Strawman, I too am in Nottingham and DD turned it on and all her channels have now gone - they were there at 11.00, so it looks like they are on there way out.

[rocky6091]

Hi i have a vm box but i think the card may have been flashed as it stopped recieving so i bought a starview 5 and now this is not working due to our area going neg3 is there any way my vm can be reflashed to recieve either by inputting codes etc asny help would be gratefull

[wilf]

dont think so at the moment, not all areas have gone n3 yet so its a wait and see game for now on most reveivers. well cable ones anyway!

[rocky6091]

Thanks wilf its like :banghead: just now need decent tv

[wilf]

i know how you feel mate, its been coming for a long while, now its here no one likes it, just have to accept free tv over for now on those particular boxes and move on.

[itsme1664]

im a newbie an pretty dumb when it comes to this shit, but readin the posts im sure at the start folk thot the present boxes wouldnt b here, mabe take a year mabe longer, but im sure sum1 will crack nag 3 [def wont b me]:stupido: jus like 2 say thanks 2 all the guys here for all the help over the years been a blast. roll on the next generation of boxes!!

[car19]

Hi;Does any body know how to ownload the software when none of the front buttons works and no remote control;all I get is a BLANK raster no signalsAll voltages are correct and there is no ripple on the power supply (have scope'd them)

[daitaxi]

rarr could you assist me in sorting the problem with box pls as we still do not have anything thanx
mine was excatly the same did firmware update and now all is fine:playingball:

[steventaz]

Last changes:

16.06.2010: DigiTV (1W)
15.06.2010: TV Globo International (13,0?E)
07.06.2010: PROGRAMME NATIONAL (5.0W)
03.06.2010: RAI 13?E Hotbird - july
01.06.2010: Telespazio Hungary (ex. Mediatech) - july
Attached Files

[steventaz]

my box is a digivox xl how can i fix it to get channel back on

[steventaz]

hi my open:media is not work on cable can you help me

[steventaz]

hi my is not working on wen i flash it with digital kaos 1.1:dito:

[the big man]

doze any one no how to get the boxs going ? in leciester

The ball is burst. :giveup:

[flynnb1uk]

Hi Guys,
The pass week or so my channels have been switching off to no signal. Now all channels have gone to no signal. I've reset and loaded firmware 2.02 as before and went through the process key code on etc, when I search for channels on auto scan nothing comes up. Is this the problem everyone is having here? Im in Cheshire where Nag3 is in place I think? Im on Starview 5, is it worth getting a new star view?
Thanks
flynnb1uk

[cactikid]

nope better not a starview,they are having a problem with their end=offline

[kenan00636]

read above nagra3

[arthur cooper]

anyone know how to get eurovox going again in dumbartonshire,thanks

[mark8393]

anyone know how to get eurovox going again in dumbartonshire,thanks

sorry mate, no way of getting it going, and dont expect a fix.

[stuckylad]

well that me box down ~~~~in nag3,anyway cant complain,had a lot of good freebie years,time to choose now keep vermin and upgrade,sly, or sat,may play vermin and sly off against each other,anyone know of any good deals going?

[motherwell boy]

only my movie channels away so far wonder how long the rest will last:(

[sexylady19]

can i up date my dogge card so i can get myhd channels back

[boomer39]

can i up date my dogge card so i can get myhd channels back
no..........................

[Sirwigster]

Think Stourbridge West Midlands has just gone all Nag3 on my ass!

Over and Out!

[speedynn3]

oldbury, westmidlands have been hit....sv has just a blank screen....

maybe some 1 should write a book , 1001 things to do with your starview other than watch tv

[cactikid]

radio alarm clock lol

[dandanthegardeningman]

kid nap rb he tell ya/chip is boxes lol/

[tezzerbabe]

Hi i am experiencing the same thing, can anyone help

thanks

tezzerbabe

[wolfboyrea]

unfortunatley it looks like the movie channels and an assortment of other channels are gone for good ( if it really is nag3) on the standard definition boxes, but i am currently recieving all the new hd movie channels and sky sports hd on my starview hd combi plus without loading new firmware or using lan ports.
this is why i am suspicious about people that instantly assume nag 3 and dont give other possible explanations.

i wouldnt run out and buy the hd combi at the moment because not one single person ( apart from tricky dicky )actually knows what is going to happen.

[maloni]

No chance at present mate most of Uk are almost dead

[monmsv]

thanks information

[erpatg]

I just lost most of the channels from my superbox usb4 yesterday,ihow to get it back?please

[boomer39]

I just lost most of the channels from my superbox usb4 yesterday,ihow to get it back?please
you dont... you have been nagra3'd.. next ?...

[birminghamlad]

hi guys i got starview 5 box usb2

i got all channels apart from itv1 and channel 4 i rescanned and they dont come up i set my box to factory settings and still no good have u any ideas whts going on.:(

[boomer39]

hi guys i got starview 5 box usb2

i got all channels apart from itv1 and channel 4 i rescanned and they dont come up i set my box to factory settings and still no good have u any ideas whts going on.:(
seriously mate, if thats all you have lost, then you are very lucky...all will go soon... but in the meantime, try a rescan with other providers... .. its a bit of interest as well,