PDA

View Full Version : ducato 2.8 jtd immo off



autodiag1
5th February, 2010, 06:59 PM
hi everyone i wounder if someone can help i need immo off solusion for a 2001 ducato 2.8 jtd

ecu number bosch 0281 010 486

from reading i think i need flash 29f400 and eprom in engine ecu then unplug immo box

i need both dumps or working solusion

thanks
andrew

ducki
9th February, 2010, 04:03 PM
Hi,

you have imho three ways:

1. post your original 29f400 dump here. Maybe you become help?
2. load the soft "Im*o cleaner 2.0" and the soft winols 1.500 from here. With *cleaner 2.0 you can modifying your dumpfile and later with winols (included the ols.dll for edc15 c7 Fiat) you can make the checksum. Than reload this File to the ECU. Cut the wire on pin 11 ECU (im*o pin)
3. buy a im*o-Emulator for Fiat (fa. uab atomis) and follow the instruction by the delivered pdf. Than you need a dump from the 5p08 EEPROM (You'll need more Hardware, like epromburner, soic8-clip)

I'v also a Ducato 2,8jTD (0281011047) and the same problems. Each ECU is different. Exist 12 different ECUs for this car :motz:

Post here, what you will doing.

greetz