Dreambox 500c,loading the keys into Var& scc

[mojo25]

Hi everyone,
I have flashed my dreambox 500c with dk_v1 file ,using dreamup & Null serial cable. still openes FTA channels only.I was told to download the keys & put them in to Var/scc directory ,etc.
Do n't know which keys to download & use and how to flash the keys dreamup without erasing the dk_v1 file,please.:hmpf:

[father ted]

Hi everyone,
I have flashed my dreambox 500c with dk_v1 file ,using dreamup & Null serial cable. still openes FTA channels only.I was told to download the keys & put them in to Var/scc directory ,etc.
Do n't know which keys to download & use and how to flash the keys dreamup without erasing the dk_v1 file,please.:hmpf:

you dont flash the keys you use an ftp programme like flashfxp to gain access to your box then you transfer them via this method

[mojo25]

Hi there,could n't connect ,using FXp file transfer as did n't connect at all for some reason.I tried all available IP addresses, etc & still no joy.I got dreamup working,is it possilble to use dreamup for that.please.

[father ted]

wot you need is the ip addy thats on your box rite now,once oyu have then you can fxp .do you know how to do that?

[Donnie Darko]

You'll also need a crossover cable,a straight ethernet wont work.

[mojo25]

I have installed the FXP,THe ip address on my box is 192.168.2.4 & the iP address for my router which is Belkin is 192.168.2.1.I have tried this in the setup menu with DHCP both abled & disabled,still did n't connect,I'm afraid.

[Devilfish]

Make sure you put the ip address of your dreambox in the flashfxp program.

If you are connecting the box to your router, tick the DHCP option and reboot. Then go back in and see what ip address the router has assigned and use that to connect in flashfxp.

Dreambox Guides, Tutorials, Tips and Hints Blog Archive How to Connect your Dreambox to your PC (http://www.dreamboxtips.com/how-to-connect-your-dreambox-to-your-pc/)

[mojo25]

Hi There,
the Ip address in the box showing is 192.168.0.24,and the is a Belkin with a default 192.168.2.1.how the router does assign the ip,I wonder??
Is there any way we could use dreamup to upload the keys??

[Donnie Darko]

You cant use dreamup,is it a crossover cable?change to db ip to what you require.

[markpearson16]

Hi

I have downloaded filezilla and got a crossover cable from argos, I ran filezilla and put all the info I need in but it still wont connect to mt dreambox. It says cannot connect to server.

Have you any ideas what I could be doing wrong.
Any help is much appreciated.

Mark

[SIRIPALA]

SET DB IP AS 192.168.1.100
NETMASK 255.255.255.0
NAMESERVER 192.168.1.1
GATEWAY 192.168.1.1
DONT TICK DHCP(MY NETGEAR RUTER DHCP IS NOT ENABLE)
SAVE IT.
THEN OPEN FILEZILLA USE 192.168.1.100
I GOT CONNECTED FTP THAT WAY AND TRANSFERD THE FILE.AND MY DB WORKED FINS AFTER THAT.
:five:

[The Great one]

how do download the flashfxp file?