2010 BMW F10, make new key with OBDStar

[UrosM96]

Hello,
Can someone help me?

I have a problem with making a new key for BMW F10 with OBDStar. Cannot recognize CAS4. I don't know why. I can't read dFlash, pFlash and ImmoData either.

Here are photos of the problem:

https://i.postimg.cc/4YVYv8B0/viber-image-2021-08-20-11-30-42-588.jpg (https://postimg.cc/4YVYv8B0)


https://i.postimg.cc/xXvdNXdD/viber-image-2021-08-20-11-30-41-740.jpg (https://postimg.cc/xXvdNXdD)

https://i.postimg.cc/VSzkqzSS/viber-image-2021-08-20-11-30-42-151.jpg (https://postimg.cc/VSzkqzSS)
https://i.postimg.cc/v1XHXC90/viber-image-2021-08-20-11-30-42-662.jpg (https://postimg.cc/v1XHXC90)
https://i.postimg.cc/R6FCYGL4/viber-image-2021-08-20-11-30-42-895.jpg (https://postimg.cc/R6FCYGL4)

https://i.postimg.cc/Jts4c6hQ/viber-image-2021-08-20-11-30-43-248.jpg (https://postimg.cc/Jts4c6hQ)


Thanks in advance!
(https://postimg.cc/LgJXJvJN)

[BmwMerc]

as it says this swfl is not supported and you have to upgrade your CAS. or maybe it is CAS4+ and you try to do it obd. not sure how those chinese tools recognize your HW and SW you should know better.
secondly, you are realy brave to use this kind of tools on CAS4 and I really hope pFlash and dFlash is not damaged after bad reading.
well, unless you`ve got some other tools to recover it in case if it goes wrong. good luck

[UrosM96]

dFlash and pFlash is okay after bad reading. Car is working normally.
Do you know, can I update CAS with OBDStar or must use some other tool?

Thank you in advance!

[brend]

Use better tool for this job.
Or prepare new key dump away.

[UrosM96]

Thanks for the info!
Which tool do you recommend?

[caliskan71]

They mean you play with fire in cas4+ chinese tools and programmers,many users give damage during read in cas4 years ago..use eu based genuine tools avdi,autohex,bmw explorer etc...for flash autel or ista-p etc...

[UrosM96]

Thank you!