PDA

View Full Version : 2002 Skoda Fabia AUB need help with ECU soft coding



AutoX4242
6th February, 2010, 11:14 AM
Hello all, I need to check the Soft coding on this vehicle and can't find any info on it.

Old engine ECU was fried, unable to extract any info from it. Exchange ECU fitted and coded in. The vehicle runs but has the following issues;

1. ECU permanently logs code for engine speed signal, although new genuine sensor fitted and live data in engine ECU shows correct engine speed
2. Oil pressure light on dash flashing, although oil pressure has been checked with gauge, and live data in instuments shows oil pressure OK
3. Live data in instruments shows no engine speed from ECU.

I have some possibilities in mind;

1. Soft coding is wrong in ECU
2. New (exchange) ECU is faulty
3. We stripped the dash to extract the vehicles original pin code in order to code ECU, we may have damaged something, although we have re-stripped it and checked and all seems OK.

Before I move forward, I would like to check the coding, any help would be much appreciated. Log attached


Friday,05,February,2010,17:03:37:25889
VCDS Version: Release 908.1
Data version: 20091018



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 6Y - Skoda Fabia I
Scan: 01 02 03 08 09 15 17 19 25 37 44 46 55 56 76

VIN: TMBND46Y123412329 Mileage: 69000km/42874miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 036-906-034-APE.lbl
Part No: 036 906 034 BK
Component: MARELLI 4LV 3700
Coding: 00031
Shop #: WSC 08000
TMBND46Y123412329 SKZ7Z0A1171649

1 Fault Found:
16706 - Engine Speed Sensor (G28): No Signal
P0322 - 35-00 - -
Readiness: 1110 0101

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 6Q0-907-37x-ASR.lbl
Part No: 6Q0 907 379 D
Component: ABS/ASR 5.7 FRONT V20
Coding: 00124
Shop #: WSC 13765

2 Faults Found:
01314 - Engine Control Module
79-00 - Please Check Fault Codes
01314 - Engine Control Module
79-00 - Please Check Fault Codes

-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 6Qx-937-049-B.lbl
Part No: 6Q1 937 049 B
Component: BORDNETZ-SG. 1S31
Coding: 25754
Shop #: WSC 13765

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 1C0 909 601 C
Component: 02 AIRBAG VW51 0004
Coding: 12338
Shop #: WSC 13765

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments Labels: Redir Fail!
Part No: 6Y2 919 880 B
Component: KOMBIINSTRUMENT VDO V09
Coding: 16442
Shop #: WSC 00000
TMBND46Y123412329 SKZ7Z0A1171649

1 Fault Found:
01314 - Engine Control Module
79-00 - Please Check Fault Codes

-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl
Part No: 6N0 909 901
Component: Gateway K<->CAN 1S31
Coding: 00014
Shop #: WSC 13765

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist Labels: 6Q0-423-156.lbl
Part No: 6Q0 423 156 H
Component: LenkhilfeTRW V200
Coding: 00110
Shop #: WSC 00000

3 Faults Found:
00566 - Steering Assistance Operation
27-10 - Implausible Signal - Intermittent
00816 - Power Steering Sensor (G250)
37-00 - Faulty
01314 - Engine Control Module
79-00 - Please Check Fault Codes

-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 6Q0-959-433.lbl
Part No: 6Q0 959 433 H
Component: 2Z Komfortger?t 0001
Coding: 00067
Shop #: WSC 22013

Part No: 6Q2959802
Component: 2Z T?rsteuer.FS TFK 0002

Part No: 6Q2959801
Component: 2Z T?rsteuer.BF TFK 0002

No fault code found.

End ---------------------------------------------------------------------

AutoX4242
6th February, 2010, 11:52 AM
Silly Me! just went to coding on VCDS and a box popped up with the calculator. Coding is correct

Steve