View Full Version : 9659285380 VALEO Peugeot 207 Box fuse - BSI 2004 P06-00
rob h
10th September, 2021, 07:19 PM
Hello guys,
I am looking for the correct bench connection.
The Valeo pinout displayed in the io terminal download folder, is not correct.
The picture does show a diffirent shaped bsi.
833727
This is the one i want to connect to.
9659285380 VALEO
Peugeot 207 Box fuse - BSI 2004 P06-00
rafal
10th September, 2021, 07:43 PM
have a look here
and here:
https://www.digital-kaos.co.uk/forums/showthread.php/520145-Valeo-peugeot-307-pin-out-need
kiszka
10th September, 2021, 07:45 PM
Hello guys,
I am looking for the correct bench connection.
The Valeo pinout displayed in the io terminal download folder, is not correct.
The picture does show a diffirent shaped bsi.
833727
This is the one i want to connect to.
9659285380 VALEO
Peugeot 207 Box fuse - BSI 2004 P06-00
http://blog.obdii365.com/2016/05/09/peugeut-307-bsi-hc912-pinout-to-carprog-xprog-upa/
rob h
10th September, 2021, 08:32 PM
Thanks guys, Yes, It is this one.
with 95128 inside.
833742
However, to get any diagnostics done on the table.
This one is not displayed, in the io folder.
So i can not connect to it, on a bench setup.
To clone these, can i swap eeprom data.
Or do i need to make it virgin and match in car?
rafal
10th September, 2021, 08:47 PM
Eeprom swap on Valeo should be enough
rob h
10th September, 2021, 10:01 PM
833754
I can not confirm the pin or current mileage.
Pin, could be 588C
Mileage, maybe allready reset.
Could be from A C3 Citroen.
If i could run diagnstics, it would help to confirm.
For now, i will disconnect dash, and plug it in the car.
Greetings Robbert
kiszka
10th September, 2021, 10:14 PM
833754
I can not confirm the pin or current mileage.
Pin, could be 588C
Mileage, maybe allready reset.
Could be from A C3 Citroen.
If i could run diagnstics, it would help to confirm.
For now, i will disconnect dash, and plug it in the car.
Greetings Robbert
588C or vice versa
kiszka
10th September, 2021, 10:14 PM
107264 km is
lion0304
10th September, 2021, 11:58 PM
Pin 588C is correct
rob h
16th September, 2021, 12:33 PM
I transfered the eeprom only.
Car starts, but many bsi dtc.
No vin readable in bsi
Lots of function dont work.
Should i make the bsi ori and program IT?
OR is there another way? Like online update flash?
lion0304
16th September, 2021, 01:23 PM
You have to use Lexia to coding VIN and options.
Usual only eeprom transfert, BSI become virgin.
rob h
16th September, 2021, 05:00 PM
I dont have Lexia. I should order one.
I do have fvdi, maybe that will sort it.
If not i will borrow lexia.
lion0304
16th September, 2021, 09:57 PM
Autel also can make BSI coding
rob h
16th September, 2021, 10:08 PM
I alrready did try with launch. No config options.
I can do some using launch, like siemens kline, but not this Valeo.
I will try with Autel, thank you
lion0304
17th September, 2021, 02:28 AM
I alrready did try with launch. No config options.
I can do some using launch, like siemens kline, but not this Valeo.
I will try with Autel, thank you
i've asked a friend mechanic coding a BSI with his Autel MS model for Citroen C4.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.