2020 CX-5 SUCCESS SF TOOL 1 MIN. JOB

[MileageAudit5]

Another random success story from SF Tool. 2020 Mazda CX-5 by obd inside car, did not need to remove this one. read eeprom via obd c86 takes about 20 seconds to read then just change and write. In total maybe 1 minute job. Scary stuff as I never really do Mazda's. Even tool warns you might freeze up cluster or ecm. Luckily nothing bad happened. Can't guarantee this success for everyone though. But worked for me =)

[Geryy]

you are lucky :)

[norbisko]

Another random success story from SF Tool. 2020 Mazda CX-5 by obd inside car, did not need to remove this one. read eeprom via obd c86 takes about 20 seconds to read then just change and write. In total maybe 1 minute job. Scary stuff as I never really do Mazda's. Even tool warns you might freeze up cluster or ecm. Luckily nothing bad happened. Can't guarantee this success for everyone though. But worked for me =)

Was it original tool? or china copy?
I have mazda 2021 cx-30 here , took the dash out but I do not see c86 or c76 inside, I believe it's elsewhere. ( also saw other post with same findings)
Thanks For Info