RE: My experience on XPROG-M

[another_seller]

hi, M8s, refer to the former posts on XPROG-M, here I post my experience on the XPROG-M, let's share and disucss here.

1st: Mercedes ISM module ST10F269 reflash (pictures below)

[another_seller]

XPROG-M working on Mercedes Motorolla MPC563/564 model programming

[another_seller]

BMW CAS3 9S12 XDP512 programming

[milkatrek]

this is oryg?

Where u find wires ?

[another_seller]

this is oryg?

Where u find wires ?
Hi m8, thanks, actually this is the one we are supplying with limitations and we working with it everyday here. below pictures deem u wl get more ideas. the wiers we made it DIY

[electromech]

Hello where did you buy or are you selling? and how much is it?

[another_seller]

Hello where did you buy or are you selling? and how much is it?

hi, m8, we didn't buy from anybody, we are just supply here to limited friends for high quality performance.

[PremierD]

hi, m8, we didn't buy from anybody, we are just supply here to limited friends for high quality performance.

Ok so you did not "buy it " from anyone mate ....so you manufactured it..?....I think that everone wants to ask the same question .... HOW MUCH...(unless they are very good friends ) and you are giving them away..... :wavey:

Why would you advertise the "quality" and what it can do on this forum... Unless its a sales pitch mate ...A lot easier to just give your "limited "friends a Manual .. instead of all the dubious screen shots..that you have posted here mate ....

[another_seller]

Ok so you did not "buy it " from anyone mate ....so you manufactured it..?....I think that everone wants to ask the same question .... HOW MUCH...(unless they are very good friends ) and you are giving them away..... :wavey:

Why would you advertise the "quality" and what it can do on this forum... Unless its a sales pitch mate ...A lot easier to just give your "limited "friends a Manual .. instead of all the dubious screen shots..that you have posted here mate ....

hi, m8, everybody only know xprog-m clone from China is not good, just they only know part of the case, for XPROG-M the experience on how to use it with quality hardware which is very important, not trying to advertise, i am more than happy to share with my experience on this tool, practice makes perfect , bro

[another_seller]

Mercedes W220 EIS 9S12 programming

[wyz1056]

is clone china,no good work,

[another_seller]

is clone china,no good work,
Hi, wyz1056, maybe too early to say "no good work", call "bolon" and you get to know everything on performance, do not piss me off too early, mate :champions::champions::champions::champions:

[obdmaster]

Hi, wyz1056, maybe too early to say "no good work", call "bolon" and you get to know everything on performance, do not piss me off too early, mate :champions::champions::champions::champions:



I offered him 200usd which is about going rate for a copy, lets not forget that this is a clone everyone. And he replied " Thanks m8, better order from TMT." Listen m8, your trying to sell us clone stuff , which at the right money we will buy. So please drop the BIG I am. Otherwise with that attitude youve got you will have a load of copy xprogs shuffed right up your arse for a long time!!!

[another_seller]

I offered him 200usd which is about going rate for a copy, lets not forget that this is a clone everyone. And he replied " Thanks m8, better order from TMT." Listen m8, your trying to sell us clone stuff , which at the right money we will buy. So please drop the BIG I am. Otherwise with that attitude youve got you will have a load of copy xprogs shuffed right up your arse for a long time!!!
hi, m8, deem you thought too much, I never lack of 200USD, why I have to use the forum to sell it ? I share what I think it is worth to share with all technicals here, you can choose to order the cheaper clones from China and resell it as I know it. Just do not assumption my attitude in your way, m8 :congrats::congrats:

[obdmaster]

hi, m8, deem you thought too much, I never lack of 200USD, why I have to use the forum to sell it ? I share what I think it is worth to share with all technicals here, you can choose to order the cheaper clones from China and resell it as I know it. Just do not assumption my attitude in your way, m8 :congrats::congrats:

YOUR DOING IT AGAIN M8 ALL YOUVE CONTRIBUTED TO THIS FORUM IS A LOAD OF DUBIOUS PICTURES AS PREMIERED SAID. NOW GO AND PLAY WITH YOUR COPY XPROG AND LEAVE

[bolonc]

I have this version of the X-PROG, it works fine.

[obdmaster]

I have this version of the X-PROG, it works fine.



Where you buy yours from m8, did it come in plastic suitcase?

[bolonc]

Equipped with a plastic suitcase。In fact, some low-cost clone from China X-PROG is a problem, but this version is of high quality - at least I used up to now no problem.

[obdmaster]

Equipped with a plastic suitcase。In fact, some low-cost clone from China X-PROG is a problem, but this version is of high quality - at least I used up to now no problem.


You didnt say where you bought it m8?

[another_seller]

Where you buy yours from m8, did it come in plastic suitcase?
m8, pic 4 u

[obdmaster]

m8, pic 4 u



I know m8 looks very nice indeed. But you still havent said how much? Going for a cigarette to cool off. Been asking you all day how much does one just the same as that cost? Everyone would like to know m8 been asking all day!!!!!!!!!!:hmmmm2:

[bolonc]

You didnt say where you bought it m8?
Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,646.20 : Store.autosvs.com (http://www.store.autosvs.com/index.php?main_page=product_info&products_id=252)

[obdmaster]

Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,646.20 : Store.autosvs.com (http://www.store.autosvs.com/index.php?main_page=product_info&products_id=252)


That site is very expensive m8, but suppose you pay bit more for quality can either you or obd2master help with this.


http://www.digital-kaos.co.uk/forums/f115/xprog-m-tms374-manual-3-001-0002-a-86704/



But never had a problem using my $195 one from ecutool yet, no plastic suitcase though.

[another_seller]

That site is very expensive m8, but suppose you pay bit more for quality can either you or obd2master help with this.


http://www.digital-kaos.co.uk/forums/f115/xprog-m-tms374-manual-3-001-0002-a-86704/



But never had a problem using my $195 one from ecutool yet, no plastic suitcase though.

hi, m8, refer to http://www.digital-kaos.co.uk/forums/f115/xprog-m-tms374-manual-3-001-0002-a-86704/#post446877 , not trying to sell it here, bro, no need striving for the few hundreds dollars and spend time discuss on the prices, we are quality and technical support oriented team, later i will post more professional high quality tools we are using daily and share with friends here in the forum, and let's enjoy the techs

[adam28]

Auto svs is expensive. may as well buy original and purchase authorizations as and when you need them.(will not seem so expensive then) At least you know its going to work. And you get some good support.From Delboy and rodders you never know what you gonna get.
Looks very pretty in the plastic casing though. Think you can get one pretty similar in B&Q for about a tenner.

[obdmaster]

Auto svs is expensive. may as well buy original and purchase authorizations as and when you need them.(will not seem so expensive then) At least you know its going to work. And you get some good support.From Delboy and rodders you never know what you gonna get.
Looks very pretty in the plastic casing though. Think you can get one pretty similar in B&Q for about a tenner.



It looks like this one m8:
Programmers XPROG-M Programmer (http://www.tek-tronics.co.uk/product_info.php?cPath=37&products_id=115)


and tektronics sell our one for ?300 , m8

[another_seller]

Auto svs is expensive. may as well buy original and purchase authorizations as and when you need them.(will not seem so expensive then) At least you know its going to work. And you get some good support.From Delboy and rodders you never know what you gonna get.
Looks very pretty in the plastic casing though. Think you can get one pretty similar in B&Q for about a tenner.
thanks m8, you are right, just we are tech service oriented and not for few hundreds dollars to mess the market and fight with TMT.

[obdmaster]

thanks m8, you are right, just we are tech service oriented and not for few hundreds dollars to mess the market and fight with TMT.



Did you guys ever watch bullseye on a sunday afternoon? Where if they lost they still brought out the speed boat or car and jim bowen said "Heres what you could of won". And they went home with "BFH" bus fare home.


Point of the story is obd2master reminds me of that program.
:laugh:

[another_seller]

Did you guys ever watch bullseye on a sunday afternoon? Where if they lost they still brought out the speed boat or car and jim bowen said "Heres what you could of won". And they went home with "BFH" bus fare home.


Point of the story is obd2master reminds me of that program.
:laugh:
:hmmmm2::hmmmm2:Hi, m8, maybe what we lost in this forum is people do not treat us from the technical point of view, just reseller's view. I am confident we can get a lot of experience shared here :congrats:

[adam28]

No income tax no vat no money back no guarantee .
only fools and horseslol

[another_seller]

No income tax no vat no money back no guarantee .
only fools and horseslol
definitely, m8, fools and horses no money & can't pay for quality service and tools with guarantee.

[obdmaster]

definitely, m8, fools and horses no money & can't pay for quality service and tools with guarantee.



Its a joke on you silly, you would need to be english m8.:laugh:

[obdmaster]

Technical expertise is not posting pictures of tools m8. :laugh:


Technical expertise is helping other members with there problems m8.

[another_seller]

Technical expertise is not posting pictures of tools m8. :laugh:


Technical expertise is helping other members with there problems m8.
Exactly, m8 I can't show that I am one arrogant england guy, only pictures say what we are involving, afterall this forum is not only opened for arrogant english guys.

[obdmaster]

Exactly, m8 I can't show that I am one arrogant england guy, only pictures say what we are involving, afterall this forum is not only opened for arrogant english guys.






Anyway had enough of taking piss out of you know. I promise wont reply to any of your threads now. That will make us both happy m8

[adam28]

Thread should be closed, going nowhere and helping nobody.
If anybody wants to buy from mr obd2bobmaster contact him on PM.

PS agree with obdmaster no more replies from me either!

[another_seller]

agree !! m8

[z786]

obdmaster vs obd2master

lol

only messing, 2 be fair with obd2master iv heard from other people that the autosvs clone works well with 9s12 secured and doesnt hav 50 times limit

as for the price your looking around $400-$500 mate

[obdmaster]

Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,234.65 : Store.autosvs.com (http://www.store.autosvs.com/index.php?main_page=product_info&products_id=252)


Not $400-$500 m8

[Meat-Head]

Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,234.65 : Store.autosvs.com (http://www.store.autosvs.com/index.php?main_page=product_info&products_id=252)


Slightly confused who is selling what, but is it going to be a question of "we have your money, now ~~~~ off"?

[z786]

Programmer XPROG-m Motorola 68HC05 , 68HC08, 68HC11, 68HC(S)12 XPROG [AS800XPROGM] - €1,234.65 : Store.autosvs.com (http://www.store.autosvs.com/index.php?main_page=product_info&products_id=252)


Not $400-$500 m8

ignore dat price mate, iv got a link in there, the price i gave is correct, they go up n down but normally stay between that range

[another_seller]

ignore dat price mate, iv got a link in there, the price i gave is correct, they go up n down but normally stay between that range
thanks, z786, it seems only you know my XPROG-M is the best quality, hope you can share your experience of our XPROG-M from Neutral point of view ... it is no problem for me to share with you on high quality XPROG-M of mine with the price you wanted.

[tehnosoftex]

thanks, z786, it seems only you know my XPROG-M is the best quality, hope you can share your experience of our XPROG-M from Neutral point of view ... it is no problem for me to share with you on high quality XPROG-M of mine with the price you wanted.
Hi, if you want so much to share with us, please share some high resolution pictures of inside of your clone. May be we can see if it is or not differences between clones and may be we can correct some mistakes

[Dunker]

I've just found this thread while I was looking for info on the XPROG-M, good funny reading. Anyway, if I can ask what to you boys will be a simple question...

Am I right in thinking that when purchasing the real deal XPROG-M it will read all the MCU's etc. in the device support list so long as they are unsecured.

And, if you need to read a secured MCU (that is supported) you need to buy the appropriate authorization for that MCU.

I only ask as I have a secured ATMEGA 48V that I would love to take a peek at the program code and the eeprom (its lock bits are set to mode 3) - on reading in my Dataman-48XP I get the following as you would expect:


00000000 00 00 01 01 02 02 03 03 04 04 05 05 60 60 07 07
00000010 08 08 09 09 0A 0A 0B 0B 0C 0C 0D 0D 0E 0E 0F 0F
00000020 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17
00000030 18 18 19 19 1A 1A 1B 1B 1C 1C 1D 1D 1E 1E 1F 1F

etc. etc. etc. all the way down to

000010E0 E0 E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EF
000010F0 F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FFI also have an allegedly secured ST10F269-03 to look at in the near future. Would the real XPROG-M be able to read these devices with the appropriate authorizations. Also would a decent XPROG-M clone do the same?

[another_seller]

I've just found this thread while I was looking for info on the XPROG-M, good funny reading. Anyway, if I can ask what to you boys will be a simple question...

Am I right in thinking that when purchasing the real deal XPROG-M it will read all the MCU's etc. in the device support list so long as they are unsecured.

And, if you need to read a secured MCU (that is supported) you need to buy the appropriate authorization for that MCU.

I only ask as I have a secured ATMEGA 48V that I would love to take a peek at the program code and the eeprom (its lock bits are set to mode 3) - on reading in my Dataman-48XP I get the following as you would expect:


00000000 00 00 01 01 02 02 03 03 04 04 05 05 60 60 07 07
00000010 08 08 09 09 0A 0A 0B 0B 0C 0C 0D 0D 0E 0E 0F 0F
00000020 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17
00000030 18 18 19 19 1A 1A 1B 1B 1C 1C 1D 1D 1E 1E 1F 1F

etc. etc. etc. all the way down to

000010E0 E0 E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EF
000010F0 F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FFI also have an allegedly secured ST10F269-03 to look at in the near future. Would the real XPROG-M be able to read these devices with the appropriate authorizations. Also would a decent XPROG-M clone do the same?

hi, Drunker, The xprog-m won't support secured ATMEGA 48V, while ST10F269-03 my XPROG-M can work for sure, if you need any support on this, pls PM me, I can't agree with people who say I am making mess in this forum, we can share and support each other which is no problem.

[another_seller]

Hi, if you want so much to share with us, please share some high resolution pictures of inside of your clone. May be we can see if it is or not differences between clones and may be we can correct some mistakes
IF THIS MESSED ANYBODY, I APOLOGIZE !

[another_seller]

I've just found this thread while I was looking for info on the XPROG-M, good funny reading. Anyway, if I can ask what to you boys will be a simple question...

Am I right in thinking that when purchasing the real deal XPROG-M it will read all the MCU's etc. in the device support list so long as they are unsecured.

And, if you need to read a secured MCU (that is supported) you need to buy the appropriate authorization for that MCU.

I only ask as I have a secured ATMEGA 48V that I would love to take a peek at the program code and the eeprom (its lock bits are set to mode 3) - on reading in my Dataman-48XP I get the following as you would expect:


00000000 00 00 01 01 02 02 03 03 04 04 05 05 60 60 07 07
00000010 08 08 09 09 0A 0A 0B 0B 0C 0C 0D 0D 0E 0E 0F 0F
00000020 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17
00000030 18 18 19 19 1A 1A 1B 1B 1C 1C 1D 1D 1E 1E 1F 1F

etc. etc. etc. all the way down to

000010E0 E0 E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EF
000010F0 F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FFI also have an allegedly secured ST10F269-03 to look at in the near future. Would the real XPROG-M be able to read these devices with the appropriate authorizations. Also would a decent XPROG-M clone do the same?

HI, ATMEGA chips I know here the way to crack it is like the way from the picture.

[tehnosoftex]

Thank you for that picture but i think that other clones will perform the same. I have a clone from china and I was unsure about its performance but after i test it I came at conclusion that is ok. I find very good for read/write secured motorolas but for other things I think there are better options. For instance for ecus there are cloned bdm100 which can identify better the ecu and did not need to know what mcu it is for read config a or b or so and bdm100 do also the checksums. For st10 I think that is better to use flashit which it can be found here in dk with simple max232 interface. Did not tested for micronas but I hink that can be good also for that. I post some pictures of my tests and there are xprog clones from 150$ with all adapters and all authorizations.

[ngoncalo]

please i need st10 scheme, cant read it with xprog or xprog scheme.
thanks

[Dunker]

Well I've just had delivery from ecutool of a clone that looks identical to the pictured in tehnosoftex (http://www.digital-kaos.co.uk/forums/members/87877-tehnosoftex/) 's post (#48). I've tried a few eeproms and a ST10F269-03 so far and all is good. It has all authorizations but I guess time will tell exactly what it will and will not do.

One question though, as this clone comes without software, I am using v4.5 from ecutool's site (its not listed correctly in their downloads section but it's easy enough to spot, its build 2009.05.13) - is it OK to use the official v4.5 (build 2010.02.12) from TMT so long as I never hit the 'Update' button?

[tehnosoftex]

Hi, I have 2009.08.31 which is the last safe version for clones. I get it from here, dk, use the search button. Do not try a newer version or you will get a unusable xprogm

[tehnosoftex]

Hi, some new experiences. I manage to read mpc556, tms374 but when I try to read a ISM module with st10f269 i get incorrect device ID. ISM module is like in the first post from that topic. There is a hint for st10 mcu?

[Pzolee]

At me that's the problem ISM module read ST10F269. Incorrect ID or device connection.
What may be the problem?

[OPC]

hi,have you a list car for xprog?

[OMEG]

.....
Thank.

[OMEG]

....
thank

[ahadi]

Hi, some new experiences. I manage to read mpc556, tms374 but when I try to read a ISM module with st10f269 i get incorrect device ID. ISM module is like in the first post from that topic. There is a hint for st10 mcu?

hello ,

do you have pic for tms374 mcu mounted on board .


thanks

[universal technics]

Sure,,,you can mount TMS374, but need some modifications.