PROBLEM BMW X5 CAS3 +

[randa]

hello
i have bmw x5 no ignition
i think problem eprum or flash
pls chk files
flash read with vvdi prog

[burger1521]

Any work been carried out on it? Adding keys or anything


Sent from my iPhone using Tapatalk

[randa]

yes i program two key program ok witk tango programing

but no igination

[vanos batam]

WHAT DTC on the CAS ?

[randa]

WHAT DTC on the CAS ?

ok , thank you
now i chk with G-SCAN2
CHK CAS
THE DTC IS =A0AD Processor

[Weasel3]

Write back original files.
And test if car start.

Then you do the key programming.
In a different way.

[randa]

ok
same problem
i think problem is eprum

[Weasel3]

Then
Try do to a OBD scan with a good scanner and delete all errors.
And only try to start the car.
With the original key.

[randa]

original key lost
i make two keys
with tango

[Weasel3]

This is a 2008 model?

Did you write back any files, after make key first time?

[randa]

This is a 2008 model?

Did you write back any files, after make key first time?
ok
i found files eprum and flash
write all to cas
make new key programed
remot good open and close ,
open igination but no start
now problem is eprum 0l15y 100\100
i need now repair eprum
thank u for help

[kiszka]

ok
i found files eprum and flash
write all to cas
make new key programed
remot good open and close ,
open igination but no start
now problem is eprum 0l15y 100\100
i need now repair eprum
thank u for help
I think that when you read your programmer does stupidity
https://mega.nz/file/p6gG2biA
I might be wrong, check out this file

[randa]

I think that when you read your programmer does stupidity
https://mega.nz/file/p6gG2biA
I might be wrong, check out this file

I will tell you tomorrow
thank u

[randa]

I think that when you read your programmer does stupidity
https://mega.nz/file/p6gG2biA
I might be wrong, check out this file

hello
now i write eprum but same problem no igination

[kiszka]

hello
now i write eprum but same problem no igination

if I know correctly, the tango does not make the keys well in CAS

[randa]

if I know correctly, the tango does not make the keys well in CAS

yes , now program with AK300
i alwayes programming no problem with ak300
but
program eprum and flash another cas program with ak300 new key
ok open igination
i want same flash and repair eprum
i am no have programmer tcm

[randa]

hello
this is file is ok eprum good
write to cas and make new key ok open dashbord and radio aircondation all ok
but not start
i not have any dignostic for program ESG or DDM ECU
pls any one help me to repair eprum

[randa]

hello
any one help me repair eprum 0l15y

[kiszka]

hello
any one help me repair eprum 0l15y

your original eeprom only uses the short ISN, the new eeprom uses the short and long ISN
besides, in the new eeprom you had to change Vin and ISN and then make a key then synchro with INPA or another program for BMW

[vov4ik]

2nd to the above, any tool that can adapt the "new" module

[ecuprogramer]

randa

read flash+eeprom ecu and upload +upload ecu all information
(https://www.digital-kaos.co.uk/forums/member.php/614908-randa)