alex_r_2001
15th October, 2021, 03:46 AM
This software has really helped me out .... I have already tested on NGC3 CAN as well as NGC4 worked flawlessly....
example==== When purchasing donor ecu from scrap yard there is really no way to know if it has SKIM enabled (security).... If you install ecu with skim enabled in vehicle that does not have skim option it will not work because ecu is looking for skim...... So just wanted to share my results... No need to flash ecu .... Works just like J2534 toolbox from drewtech only thing j2534 toolbox is limited to older ecu .....
( j2534 toolbox cannot disable skim on NGC3 CAN or NGC4)
click disable skim 3 seconds later then disconnect battery for a moment reconnect batttery and start vehicle... software works with J2534 passthru device.. I tested with Snapon Passthru Pro
example==== When purchasing donor ecu from scrap yard there is really no way to know if it has SKIM enabled (security).... If you install ecu with skim enabled in vehicle that does not have skim option it will not work because ecu is looking for skim...... So just wanted to share my results... No need to flash ecu .... Works just like J2534 toolbox from drewtech only thing j2534 toolbox is limited to older ecu .....
( j2534 toolbox cannot disable skim on NGC3 CAN or NGC4)
click disable skim 3 seconds later then disconnect battery for a moment reconnect batttery and start vehicle... software works with J2534 passthru device.. I tested with Snapon Passthru Pro