nissan micra pn-3201m-b

[DAHDOC]

after changing bcm and ecu kit the radio is showing secure is there away of fixing this i have 2 24c64 chips

[Mankyro]

after changing bcm and ecu kit the radio is showing secure is there away of fixing this i have 2 24c64 chips

..................5664

[DAHDOC]

ok this didnt work radio now say please init

[Mankyro]

ok this didnt work radio now say please init

Photo of display

[DAHDOC]

here is a pic plugged in in the car

[Mankyro]

here is a pic plugged in in the car

Read dump to compare again.

[shooting]

read dump

Rad Post#1 ;)

wbr

[shooting]

after changing bcm and ecu kit the radio is showing secure is there away of fixing this i have 2 24c64 chips

Here you go... PIN = 5664 (Dump 2) and must be in the car

wbr

[DAHDOC]

ok i tried your file and I put radio in car then power up and it is same please init it says

[Mankyro]

ok i tried your file and I put radio in car then power up and it is same please init it says

Plug on the table, pin EQ1 to the GND.

[DAHDOC]

ok i did try on table and also in car it is still the same please init

[Mankyro]

ok i did try on table and also in car it is still the same please init

pin EQ1 to the GND.

Read dump to compare again.

Maybi bad 24c128

[benyunes]

connect EQ1 and EQ4 to ground