A bit of advice needed ... Please

[sparkjas]

hi im about to purchase a technomate 5400 ci super , do i need a loader to put a patch onto this reciever many thanks

[Manic01]

No can all be done via usb stick.

[insane.thc]

really? how??

[Manic01]

YouTube - How to upgrade Tm-5000 series with Usb
YouTube - How to upgrade Tm-5000 series with Usb

--------------------------------------------------------------------------------

This is how to load official software and patches,softcam key files with a memory stick
************************************************** **************
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************************************** *********************
From the forum first download the correct patch for your receiver,
and then open the zipped folder and send the patch to the usb stick. Also download latest Softcam and unzip and send to usb stick]
You are now ready to transfer the patch/softcam onto your receiver. next insert your usb memory stick in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight,
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens. you have now loaded the patch,
Load the softcam the same way

[sparkjas]

thanks for the help . also will a subscription paid sky card work in this box ? thanks again

[Manic01]

Not sure these days tbh.

[phpicker]

YouTube - How to upgrade Tm-5000 series with Usb (http://www.youtube.com/watch?v=N9Dd-xsvv3A)
YouTube - How to upgrade Tm-5000 series with Usb

--------------------------------------------------------------------------------

This is how to load official software and patches,softcam key files with a memory stick
************************************************** **************
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************************************** *********************
From the forum first download the correct patch for your receiver,
and then open the zipped folder and send the patch to the usb stick. Also download latest Softcam and unzip and send to usb stick]
You are now ready to transfer the patch/softcam onto your receiver. next insert your usb memory stick in the usb port under the front flap and then turn the receiver on to a free to air channel ready to load the patch. then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight,
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens. you have now loaded the patch,
Load the softcam the same way

Found this very helpfull, I was confused with the softcam, I transfered the latest patch and it opened a lot of channels on hotbird so I did not tranfer the softcam witch resulted in the channels only lasting about a week. Do I now have to get an other patch or can I simply install the softcam file?

[mdt]

I transfered the latest patch and it opened a lot of channels on hotbird so I did not tranfer the softcam witch resulted in the channels only lasting about a week. Do I now have to get an other patch or can I simply install the softcam file?[/QUOTE] the channels you were getting have changed key so im not 100% sure but you might need a new patch, if not you can enter the keys manually or load a softcam