PDA

View Full Version : Hyundai tucson 95910-N7050 Crash and pinout


tareksadek
1st November, 2021, 07:58 PM
Dears
Hyundai tucson 2021
95910-N7050
what is the processor to read ?
and what is the pinout for this control ?
the numbers on the right processor are : ATIC155 - A2C01139902 - S301030MBB2P2ZP
and the left processor : 15803 - 3T 2049 - CMAK0008V
attached is the reading from the 95256 eeprom
ChipGods
2nd November, 2021, 09:12 AM
cleared dump.
superjet
2nd November, 2021, 10:51 AM
Other side photo......
tareksadek
2nd November, 2021, 04:32 PM
This is the other side
tareksadek
2nd November, 2021, 06:38 PM
cleared dump.
You didnt send me the password brother ?
tareksadek
3rd November, 2021, 01:42 PM
cleared dump.

I tried but still recording crash !!
ChipGods
3rd November, 2021, 03:25 PM
it means crash is stored in mcu
tareksadek
3rd November, 2021, 05:12 PM
it means crash is stored in mcu

The mcu is r7f7 but i cannot find any pinout for this control
hacper
4th November, 2021, 07:59 AM
Do You have programmer for R7F7015803? I think nobody have at this moment.
zalupentiy
6th January, 2022, 11:00 PM
Try this pinout
fuzz1
7th January, 2022, 06:52 AM
Try this pinout
Hi
Thanks for the pinout.

Just wondering about the -12 V. Looks a bit surprising. Thought it would be ground.
tareksadek
27th January, 2022, 02:07 PM
Try this pinout

Unfortunately this pinout doesn't work with me
I tried -12V and GND
Do you have any advice ?
cougar89
20th February, 2022, 08:41 PM
Just tried to read it with Zalu connection method ,I used the smok Jtag,it asks for 16 byte password to unlock it
fuzz1
21st February, 2022, 07:07 AM
Try to read the eeprom 92256. Maybe you might get lucky