Rammsteinfanat
1st November, 2021, 08:08 PM
Hi everyone! https://www.ecuconnections.com/forum/images/smilies/icon_e_smile.gif I need help. I changed the engine Z19DT to Z19DTH. Vectra C Caravan 2005
It was like this:
HW: 0281011914
SW: 1037371351P319_O83
ECU: EDC16C9
Engine: Z19DT
BDM File ORI
844616
It became like this:
HW: 0281011914
SW: 1037372745P319_O83
ECU: EDC16C9
Engine: Z19DTH
BDM File ORI
844615
For Z19DT, I easily turned off EGR.
Like this:
844617
For Z19DTH, this did not work, although their firmware is almost the same. Got a P0400-5A error. But I found a way to disable EGR. But I'm not sure that's right. Because these maps are in addresses that start at 06 * * * * ... But there MPPS does not read or write? I use KESS + KTAG https://www.ecuconnections.com/forum/images/smilies/icon_e_smile.gif
That's how I turned off EGR:
844618
The original Files from the two ECUs attached to the message (Used KTAG for reading). Maybe someone needs it.
Help me with the Maps for this firmware for Z19DTH. Does someone have Map-pak? Or will someone help make Stage1?
It was like this:
HW: 0281011914
SW: 1037371351P319_O83
ECU: EDC16C9
Engine: Z19DT
BDM File ORI
844616
It became like this:
HW: 0281011914
SW: 1037372745P319_O83
ECU: EDC16C9
Engine: Z19DTH
BDM File ORI
844615
For Z19DT, I easily turned off EGR.
Like this:
844617
For Z19DTH, this did not work, although their firmware is almost the same. Got a P0400-5A error. But I found a way to disable EGR. But I'm not sure that's right. Because these maps are in addresses that start at 06 * * * * ... But there MPPS does not read or write? I use KESS + KTAG https://www.ecuconnections.com/forum/images/smilies/icon_e_smile.gif
That's how I turned off EGR:
844618
The original Files from the two ECUs attached to the message (Used KTAG for reading). Maybe someone needs it.
Help me with the Maps for this firmware for Z19DTH. Does someone have Map-pak? Or will someone help make Stage1?