View Full Version : Nissan Patrol 3.0 ZEXEL ECU checksum need
Yura123
3rd November, 2021, 04:26 PM
Please
Nissan Patrol ZEXEL ECU checksum need
Thanks
beltronics
3rd November, 2021, 04:30 PM
with what tool did you read?
Thank you
bobolin4o
3rd November, 2021, 04:30 PM
Use this...
Regards!
Yura123
3rd November, 2021, 04:32 PM
Hi. This work not correct. Not modul Zexel
Yura123
3rd November, 2021, 04:33 PM
with what tool did you read?
Thank you
External programer - 2 flash
bobolin4o
3rd November, 2021, 04:34 PM
Did you test?
Or just saw is Bosch TDI instead of Zexel...
Yura123
3rd November, 2021, 04:41 PM
this program shows on the original that the cs is not correct
ECM Titaniul with modul for this ecu can will correct CS
bobolin4o
3rd November, 2021, 04:48 PM
This program shows nothing in original file.
You have to load your incomplete mod file, hit the "check" and load original...
Then you will see "one checksum corrected", save the file, split it, and flash the two chips...
Yura123
3rd November, 2021, 05:00 PM
Open the original twice and he wants to correct the checksum. It is not right.
Winols 4 also thinks it's TDI3.1 and suggests fixing CS on the original. This is not TDI 3.1.
If you select Bosch plcc32 correction from Titanium, it will also appear on the original that CS is not correct.
On this block, this is a known situation with CS correction
Chip Tuning 26
3rd November, 2021, 09:01 PM
Go to private messages
Optimizone
29th June, 2022, 11:13 AM
Hi ! I also have a patrol with 2 plcc32 flash but I can't find driver on ECM to calculate the CS ... and in fact I think that "checksum corrector" soft do a wrong CS
Anyone get a solution to help me ?
bogdanwmw
29th June, 2022, 03:23 PM
post photo with ecu.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.