Notts Area all channnels off at 1.30am Wed

[boxmanmick]

Hi guys

Was watchin me telly in bed and all channels went off at1.30am Wednesday Today 10th February.

I rescanned and it only found the channels on ref number 3000 then all different channels have a number like TV2103 TV2104 TV1102 ETC No channel identification now.

any one found the same problem???

Mike in Nottm...

[gmb45]

im in notts all my channels had gone off bout the same time but ive got an eurovox did a scan and got em all back, keep checking your post some 1 with a starview will get back to u to shed a bit of light on your problem

[RiPPeR]

Got up this morning only to see all the channels on the blue line across the bottom but blank screens .... did a re scan but nothing :(

Star view 4 box !!

[jordanjoel]

Same for me, woke up to find nowt on both sv 3 and 5 boxes. Have rescanned both and most channels are back! Struggling to find sly sp**** 1 though!!! Any thoughts from anyone?

[RiPPeR]

I have all the channels coming up on the blue bar at the bottom but nothing comes up on the screen.

You think a re install might help ?

[mark36]

it would appear that the east midlands all took a wack last night.my kryptview and sv both went about 1.30 am(Lincs)Just did a factory reset on both and all back up.I f you factory reset the SVs dont forget keycode/emu and the default key.
have just checked my subbed box and its now showing 3.7 software for the first time,so things are moving apace.

[RiPPeR]

Ok .... I did a Factory Reset, then in menu press 1570 turn 'ON' the key. Do a re scan, then you should have all your channels back !! (I did )

Hope that helps :)

[jordanjoel]

what does using default do? have rescanned and emu on, but havent done default? when i do it normally says updating but no channels?

[mark36]

what does using default do? have rescanned and emu on, but havent done default? when i do it normally says updating but no channels?

If you press the default key go to an encrypted channel(SS1) and let it update,this lets the box reset it self.Not that you have to do it if you get your channels back but sometimes it is needed.The EMU key is just turning the encryption back on.

[jordanjoel]

thanks mate, still cant get ss1, for some reason also i am gettin espn on sv3 but not on sv5 in different room? any ideas on that one please?

[maca]

thanks mate, still cant get ss1, for some reason also i am gettin espn on sv3 but not on sv5 in different room? any ideas on that one please?
scan each box from the main feed. no splitters..

[mick1888]

hi every thing working fine, just rescan and you will everything back,

[jordanjoel]

ok will try that, thanks.

[amorri1]

Lost all channels this morning (Notts area). Just done a full reset and rescan and now have all channels back as before on my starview1. The only other thing I did was to plug in my Virgin box first to check that the problem wasn't theirs. It took 10mins to update, everything was ok, unplugged it and plugged in straview. Rumours are Virgin have done some mods in Notts area last night, but it's definately not N3.

[stinkamuffin]

I have a digivox, all channels gone this morning in nottingham area. I turned off the box, did a factory reset, turned my EMU key on and then did an automatic scan. It only picked up a view channels though. I waited 5 mins, did another factory reset, turned the EMU key on and did another scan and now they are all back. Phew. Don't like the look of this N3 stuff though, may need to look into that :(

[jordanjoel]

hi again all, very frustrated still am i! Have sv 3 and 5, factory reset em both rescanned emu on default pressed and am gettin most channels. Still no Sly Sp****1 and also am getting more channels on sv3 than sv5, have connected both upto direct feed and scanned on all networks but still not all channels.... Can anyone advise please?

Cheers...

[jasbo7]

leave it on ''Sly Sp****1'' and let it update m8....heard some guy last say he had left it on for 30 mins, went out and when he got back it was on.....worth a try

[jordanjoel]

thanks mate, will give it a go...

wish me luck.

[bobtracy]

Hi im having same probs rescanned sv4 box also did factory restore and just channel info on bottom of screen but no picture ?? i have a few channels but just regular ones like itv ??? i missing my box any ideas what i could try ? im in the Nottingham area thanxs

[RiPPeR]

Hmm I have just noticed SkySports 1 is FX ... Ive tried redoing everything but it hasnt sorted it. Ive even gone through all the channels to see if its somewhere else but cant find it !!

Please help if you can Footys on tonight :P

[mrglow]

got a SV4 and as everyone else lost the chanels, did a rescan and nothing, but after a factory reset, i have all the channels bk.

[blitz dj]

my box was off aswll but thanx 2 mark36's comment i have all the channels bar sp-1 wat is now fx? does any1 have any idea how to get sp-1 back on?

[mark36]

Try taking a look in channels named BICS or TVOC etc,you might find SKY SP 1 and any other missing channels in those channels.If so manually move it to where you want and rename it.Missing channels have been found this way in the past.

[jordanjoel]

have left box on sly sp 1 for ages to update, didnt work. have searched through all other no named channels, but it aint there!!! anyone know which is the most upto date firmware for sv4? iam using 1.07 is that anything todo with my current probs? whats still puzzling me is that sv3 has nearly all other channs, but sv4 dont. even after trying everything else... has anyone got a sv4 and is still gettin sly sp 1?

[blitz dj]

just found how 2 get sly sp-1 back on. go to sp-1 press menu go to channel edit enter your code and u should get all your channels up, if u have sp-1 twice ( fx and sports ) delete the fx 1, i did this and now i have sp-1 back. 1 happy guy who can HOPEFULLY watch the footy 2nite

[jordanjoel]

just tried your advice blitz dj, soz mate no joy. still blank screen for sly sp 1.did you get any pictures once you had done it?

[blitz dj]

just tried your advice blitz dj, soz mate no joy. still blank screen for sly sp 1.did you get any pictures once you had done it?
yes m8 i am watchin it now

[blitz dj]

yes m8 i am watchin it now
have u done the factory restore aswel?

[mark36]

you could try a manual scan on transponder 731.000.thats what sky sp1 is broadcasting on now,otherwise maybe factory reset and go through the whole malarky again.Sometimes this is required as not all TPs are always picked up first time around.

[jordanjoel]

just tried that mate, i have a feeling that sv4 boxes are all experiencing the very same problem!

[mark36]

just tried that mate, i have a feeling that sv4 boxes are all experiencing the very same problem!
you may well be right.If the SV4 has a weaker less sensitive tuner than the SV3 which is quite possible then it would explain a few things.by the way the latest firmware is 1.12 but i'm not sure it'll make any difference to your issues.Others have in the past reflashed there boxes and got results when this sort of thing has happened and i've also known reset after reset has resolved things.Might be worth a go

[jordanjoel]

thanks again mate, am gonna have a rest from it now!!! no point getting stressed over a few channels is there. have a good un mark...

[lowrey]

Hi all, i have just rescanned mine SV3 and lost nearly 100 channels also trying to solve my rebooting issue with error code LD80

[gabber]

hi wondering if anyone can help . i have eurovox max in notts area and lost all channels . all codes were set to zeros this morn so updated them with keymaster v1.2 , still no channels and "service unknown message" which is new as usually says "code being updated" .
so did auto scan of channels , still same results . currently doing power scan .
anyone have any better ideas as really want to watch liverpool this eve
cheers guys
gabber

[ninja636]

Ok .... I did a Factory Reset, then in menu press 1570 turn 'ON' the key. Do a re scan, then you should have all your channels back !! (I did )

Hope that helps :)

I did get most channels back, but my SV4 has black screen on lots of them. SV3 is better, but is showing Fox on 511 instead of Sky Sports 1. just tried to change firmware back to 1.05 on the SV4 but it has now BRICKED!! screen just shows 8882. HELP!!!

[mark36]

I did get most channels back, but my SV4 has black screen on lots of them. SV3 is better, but is showing Fox on 511 instead of Sky Sports 1. just tried to change firmware back to 1.05 on the SV4 but it has now BRICKED!! screen just shows 8882. HELP!!!


If your lucky you might be able to reflash the box with the correct firmware,unlucky and you'll need to jtag the box to get it back to life.8882 is a common fault code on the SV4.this post may help a little
jtag a starview 4 box (http://www.digital-kaos.co.uk/forums/f83/jtag-starview-4-box-61963/?highlight=jtagging)

[jordanjoel]

hey everyone, have just managed to get sv4 super usb back working. WITH ALL CHANNELS. I was using old firm ware 1.07 which is why i couldnt get all channels. Just flashed with 1.12 and all is back on again even with new EPG. Yippee, for now anyway. Hope this helsp fellow sv4 folk who are having same probs!!!
My sv3 is working fine again also..

Goodluck...

[mark36]

pleased your sorted m8.sometimes with these boxes its just trial and error and repetition but then it all falls into place.frustrating but you normally get there in the end:dancing2:

[jordanjoel]

yeah, many thanks for your help Mark. would not have done it without you... Lets see how long it lasts for this time???
At least i can watch your lads get beat tonite!! ;*))

See ya matey.

[notts_alan]

Tried normal scanning and only got 12 random channels , eventually got them all back , For the starview boxs , do a factory restore , go to advanced scan change start frequency to 218000 and end to 750000 now set your area frequency (6887 notts) then scan , all the channels should now come back ok , turn emu back on when finished.

hopefully this might help some who cannot get all channels back....:wavey:

[lowrey]

im trying to flash my SV3 but keep getting flash update fail can someone help?

[lowrey]

im on windows vista if that makes any difference

[RiPPeR]

Ok ... Ive updated to 1.12 all working (I think) except for SS1.

When I go into the channel edit and delete it it deletes but then still nothing no SS1 picture :(

[RiPPeR]

Tried normal scanning and only got 12 random channels , eventually got them all back , For the starview boxs , do a factory restore , go to advanced scan change start frequency to 218000 and end to 750000 now set your area frequency (6887 notts) then scan , all the channels should now come back ok , turn emu back on when finished.

hopefully this might help some who cannot get all channels back....:wavey:

Where is Advanced scan mate ? I only get Automatic and manual


Just had a scout about on the TV and found a load more channels just giving a blank screen, Filmfour, True movies

[heno1969]

Just done a factory reset and all channels are back on. :wavey:

Make sure you put the emu back on!:hmmmm2:

[RiPPeR]

Just done a factory reset and all channels are back on. :wavey:

Make sure you put the emu back on!:hmmmm2:

Nice Avatar

Whats the EMU ? do you mean the key ?

[unadkat]

Nice Avatar

Whats the EMU ? do you mean the key ?

EMU stands for Emulator... Which decodes the channels... without the EMU the channels would not decode on these boxes

to switch on the EMU.. press menu > 1570 > Key emu > Set default key

exit 3 times

wait for code to update on a PPV channel.

[mark36]

Nice Avatar

Whats the EMU ? do you mean the key ?

yep he means key if you've got the SV4
EMU is on sv3 or earlier

[boomer39]

EMU stands for Emulator... Which decodes the channels... without the EMU the channels would not decode on these boxes

to switch on the EMU.. press menu > 1570 > Key emu > Set default key

exit 3 times

wait for code to update on a PPV channel.
on boxes after sv3's , emu is called keycode!

[RiPPeR]

OK ... thanks guys !

I updated to 1.12, turned on the Key, Done scan, deleted 511 FX.

Now I have SS1 :) But there are still several channels missing :( I just get the blank screen on them !

[boxmanmick]

Hi Guys just done a reset and rescan on my SV3 box have every channel now EXCEPT SS 1 on 511 is FX 731.000 FREQ.

I have search all the none discript channels like tv3 tv 18 etc but SS 1 is nowhere to be found.

Has it moved from 731.000Khz ??

Main reason I got the box was for the Fooooty any hellllp anyone Pls

Mike in Nottm ...:hmmmm2:

[wellseytkd]

I'm trying to rescan with a eurovox 1100 and im not gettin any channels at all! any ideas?

[RiPPeR]

If you go to menu then channel edit, then look there there should be a FX on chan 511 and a SS1 on 511.

Delete the FX then save etc.

This is on SV4 so might not work for you but got to be worth a try, I also had to update to 1,12.

Hope it helps mate :)

[mark36]

Hi Guys just done a reset and rescan on my SV3 box have every channel now EXCEPT SS 1 on 511 is FX 731.000 FREQ.

I have search all the none discript channels like tv3 tv 18 etc but SS 1 is nowhere to be found.

Has it moved from 731.000Khz ??

Main reason I got the box was for the Fooooty any hellllp anyone Pls

Mike in Nottm ...:hmmmm2:

no still on 731000.put it on fx then
go into menu, channel edit and see if you've got another ss1 in there,if so make sure its the one you want and then delete the fx channel.should be ok.

whoops to slow typing today:hahaha:

[gabber]

managed to get all channels back on eurovox max
heres how .
connected cable feed direct to eurovox box (not through splitter).
went into
menu
config
clear data
input code(mines 0000)
erase all channels

then back to installation
input code again(0000)
power scan
in normal mode set symbol rate to 6887
then cursor to right to get full scan
press ok to start scan

scan takes about 40 mins
all channels are back now

PLEASE NOTE THIS METHOD WILL REARRANGE ALL YOUR CHANNELS AND U WILL HAVE TO PUT THEM BACK IN THE ORDER YOU PREFER MANUALLY , WHICH DOES TAKE A WHILE
HOPE THIS HELPS

[gsxr]

My SV4 went off earlier too, I did a master reset and rescanned the chanels, everything seems to be back on although on SS1 i have FX and chanel 5, think im going to have to re-sort my chanels.

[RiPPeR]

My SV4 went off earlier too, I did a master reset and rescanned the chanels, everything seems to be back on although on SS1 i have FX and chanel 5, think im going to have to re-sort my chanels.

If you go to menu then channel edit, then look there there should be a FX on chan 511 and a SS1 on 511. Then delete the FX then save, I also had to update to 1,12.

[brownsville]

Had the same problem do a factory reset and rescan your box and the turn back on your EMU key on the secret menu all should be fine after that.

[brownsville]

Do a factory reset on your box and rescan it then turn back on your EMU in the secret menu should be all up and running.

[mann]

Can you pls help me, i also got a new eurovox but after scanning most channels are scrambled except the free channels. Pls what should i do to unscramble all channels?

[mann]

hi every thing working fine, just rescan and you will everything back,

Pls i got a new Eurovox, after scanning all channels are scrambled except the free channels. Pls what should i do to unscramble all the channels?

[shank]

Chaps and Chapesses, please call me an idiot.

Having just spent an hour following instructions, factory reset, keycode etc, much headscratching, shouting and swearing, i suddenly realized i hadn't reinstalled 1.12 D'OH. All channels back now, cheers!

[badapple]

Pls i got a new Eurovox, after scanning all channels are scrambled except the free channels. Pls what should i do to unscramble all the channels?


Hi m8, First you will have to flash the box with the latest firmware and then scan for channels. Tell us what model of Eurovox you have and we can give you the correct firmware.
And tell us in which part of the county you are in as some places have gone to N3 and all thes boxes are dead.

[shank]

Chaps and Chapesses, please call me an idiot.

Having just spent an hour following instructions, factory reset, keycode etc, much headscratching, shouting and swearing, i suddenly realized i hadn't reinstalled 1.12 D'OH. All channels back now, cheers!

It gets better, after flicking through everything, i've got more channels than i had before! Could never get vermin1 before.

[rickyuk44]

hiya guys i have a starview 3 and its gone tits up so has a few of my friends who also have the same box notts area 10 feb 2010 anyone know how to fix this do i need to flash with new firmware or can i just change the code ?? hope someone can help

[gsxr]

If you go to menu then channel edit, then look there there should be a FX on chan 511 and a SS1 on 511. Then delete the FX then save, I also had to update to 1,12.

I have got the channel sorter on my laptop so i deleted the C5 and changed the FX to channel 161 as it was nowhere else. Thanks anyway mate

[mark36]

hiya guys i have a starview 3 and its gone tits up so has a few of my friends who also have the same box notts area 10 feb 2010 anyone know how to fix this do i need to flash with new firmware or can i just change the code ?? hope someone can help
menu
factory reset
set provider(notts 6887)
fresh install

exit out to tv
then menu
key in 1570
will bring up the nagra page
press default key
turn EMU on
exit out
go to sky sp1 and let it update
should all be good

[mej2904]

Hi Guys,
Followed the advice from RIPPER and all is well again...
" I did a Factory Reset, then in menu press 1570 turn 'ON' the key. Do a re scan, then you should have all your channels back "

Many Thanks

UPDATE.. I deleted FX .channel, let it update to 511 sp1

[gav moody]

Lost some chanells in Derby Area as well on my SV4,(SSP1,3&4 ETC). Downloaded new firmware V12 and all is ok.
Thanks to all for help!!

[heno1969]

[QUOTE=RiPPeR;451091]Nice Avatar


Thank you kind sir.....Only the best team for me!!:champions:

[mickace1]

hi i too am having the same problem. done factory reset + 1570 stuff and rescanned but channels not updating. grr. do i need firmware update???

[gurps1234]

scan each box from the main feed. no splitters..


Good point, thanks..Most of my channels now work...not the asian channels though :-( B4U/zee..etc etc...any ideas? :-)

[unicorn999]

hi lost everything tryed rescan comes up no signal and only finds 28 channels tryed putting in superusb firmware again secret menu and scan still no signal and only finding 28 channels plugged ntl box back in and that working fine have read do a factory reset how do you do this or does this just mean start from scratch as if you just had box or is there a procedure i have to do any help aprrieciated

[d3g5y]

had the same problem i had to go into menu and edit channels as ther was fx on the same channel as s/sports so i deleted fx and was able to gain access to s/sports

[kotechs1]

Does any1 know how to get back out of the

"downloading plz wait screen"
I had the older version 1.07 after reading posts thought 1.12 would solve problem and started the process
been stuck on that screen for past hour
Help plz..

[unicorn999]

just done a factory reset at first i didnt think it had worked was just showing 59 channels after scan have a starview 5 usb box then when i looked through channels on menu i found i had all channels back only one little niggle FX channel on 511 on sports menu where sky sports one should be but when i go to all channels sky sports 1 is listed there on channel 511 clicked on it and hey presto its there so how can you get 2 channels on same number i can live with this little niggle as just happy i got all my channels back

[sybal7]

super usb box
hi my channels have all gone down, re-tuned but all the pay channels have still not come back i'm in leicestershire but family in notts have the same box and their's is off as well. any new codes to put in would be great. i have a friend looking up new codes at the mo so if i hear anything i will post them...sybal7:hmmmm2:

[wilf]

all the boxes down in leicester at the min leave it a while they should come back later if not just do rescan



@ sybal there are no new codes but if you think you have found some somewhere, please dont post them on the forum. keep them to yourself or send them via pm system

[sybal7]

unicorn if you go to edit channel on the menu screen and delete fx on 511 skysports one will replace it. sybal7

[qpruleok]

Thanks for all the replys. Just switched my STARVIEW SUPER USB on (am in Leicestershire} and no channels only some bbc ones. First time this has happened in 18 months since I got it. As stated should I just leave it then rescan or do I need new firmware
Thanks for any help
Sorry just seen their are no new recodes

[wilf]

i have just rescanned one of my kryptviews and the channels are back all be it all over the place, dont know if they finished meddling or not yet.

[benwar]

Thanks for all the replys. Just switched my STARVIEW SUPER USB on (am in Leicestershire} and no channels only some bbc ones. First time this has happened in 18 months since I got it. As stated should I just leave it then rescan or do I need new firmware
Thanks for any help
Sorry just seen their are no new recodes
I'm in Nottingham and had to load firmware 1.12 to get sly sports 1. Factory reset - flash firmware - channel scan.

[qpruleok]

Channels still down, rescanned numerous times no joy have firmware 1.07 do I need to update to 1.12 or just do a factory reset
thanks for your time

[benwar]

Channels still down, rescanned numerous times no joy have firmware 1.07 do I need to update to 1.12 or just do a factory reset
thanks for your time
go to firmware 1.12, as long as your box is not a clone.

[meralto]

I got a starview 3 (non clone) with 8.02e firmware..

I did a scan soon as I got home and that didnt work, which I didnt think it would

I then did a factory reset then a scan again and woo hoo all the channels are back..

however FX is on 511 where sly sports 1 should be....can move it around but cant change the channel number for FX.....will just mark that channel as skip as i dont watch it lol

thanks for your advise and help today...

lets hope I/we dont have to keep going thru a factory reset and scan each day lol

[meralto]

oh and the PPV channels are now 43 and 50..not between m0vies n sly sports like before.....but no biggy

[meralto]

any one know how I can change FX and the PPV channels back to what the should be? i.e FX should be channel 157 not 511

ta very much :)

[RiPPeR]

any one know how I can change FX and the PPV channels back to what the should be? i.e FX should be channel 157 not 511

ta very much :)

You need to go into chan edit and either move/delete 511 FX theb 511 will become SS1

There are many posts on the FX/SS1 subject throughout this thread if you get stuck !

[qpruleok]

just downloaded software v1.12 onto box having had 1.07 since had box 18 months ago. Everything is up and running again Leicster area. Just the slight problem with the FX thing but that is nothing
thanks to everyone's help to guide me through how to do this . It was greatly appreciated:champions:

[RiPPeR]

just downloaded software v1.12 onto box having had 1.07 since had box 18 months ago. Everything is up and running again Leicster area. Just the slight problem with the FX thing but that is nothing
thanks to everyone's help to guide me through how to do this . It was greatly appreciated:champions:

All you need to do is ...

Go to Menu (whilst on chan 511)
Select Channel Edit
Then select DELETE
Then select 1 channel
Then select 511 FX
Then ok it etc

And now you will have SkySports 1 on 511

[Dowie]

Did a rescan on DK v1.1 on Mansfield 2 in the image.Found the transponders but channels Did another rescan on Cable 6887 and all channels are there it seems that they've shuffled round all the frequencies. But theres a couple that are without names. Strange??!!?! And the Security Fraud message has gone!! ha!

[ninja636]

thanks mate, still cant get ss1, for some reason also i am gettin espn on sv3 but not on sv5 in different room? any ideas on that one please?

Mate don't worry about splitters or anything. Do you know how to flash the firmware using USB? If so, just download the latest (v1.12) firmware from this site, factory reset, turn key code on and you'll have sly sprts 1. just change straight to 511, you'll get FX, let it update and change chan up twice to sly sprts 1. For some reason there are 3 chans on 511 but you can delete the other 2 off after.

Hope that helps.

[maca]

(v1.12) is not for a s/v5. latest fix for s/v 5 is here http://www.digital-kaos.co.uk/forums/downloads/starview/23/theboxsuperusb2_v2-03-20090923-bin-902/

[uHoops]

Hi I'm in Notts with a Super Box USB. Black screen appeared & thanks to the advice from you guys have managed to get up & running. I have also helped 2 other friends with the same result. I upgraded software to v1.12, factory reset, automatic scan, then turned EMU on. Had to delete two channel 511's, one for FX & cannot remember the other & then SSp1 worked fine. Thanks again for all the advice & to Satsmo for v1.12.