View Full Version : Please pair opel GID and CD30MP3
sanchos
4th November, 2021, 10:10 AM
Hello
Please pair.
Gid Delphi Grundig 13265762 with 25020 pin 8863
Radio Cd 30 mp3 13292090RG with 95160 pin 7272
Radio from car .... gid new used one .
I try use OPCOM but no success.
Best Regards.
shooting
4th November, 2021, 10:23 AM
Hello
Please pair.
Gid Delphi Grundig 13265762 with 25020 pin 8863
Radio Cd 30 mp3 13292090RG with 95160 pin 7272
Radio from car .... gid new used one .
I try use OPCOM but no success.
Best Regards.
Re-read CD30 radio as "95640" not "95160" .. for Virgining
wbr
sanchos
4th November, 2021, 10:46 AM
:)))))
Sorrry ")
shooting
4th November, 2021, 11:29 AM
:)))))
Sorrry ")
Use BOTH dumps and pair using 7272
(Add Display first then pair radio)
wbr
sanchos
4th November, 2021, 12:07 PM
Hello.
I pair first display and second radio
all ok but if i turn off radio and back on.... on display show display safe and blink.
on gid fault B1000-36
Electronic central unit....eeprom performance
i used opcom to pair both
shooting
4th November, 2021, 12:13 PM
Hello.
I pair first display and second radio
all ok but if i turn off radio and back on.... on display show display safe and blink.
on gid fault B1000-36
Electronic central unit....eeprom performance
i used opcom to pair both
Check soldering on display, this error not normal
If you are using China OpCom then this also maybe a problem
but use both my files...
wbr
sanchos
4th November, 2021, 12:17 PM
I use both your file.
Programing use vvdi prog orginal
opcom also orginal ver200603a
eeprom in gid corupted ?
shooting
4th November, 2021, 12:28 PM
I use both your file.
Programing use vvdi prog orginal
opcom also orginal ver200603a
eeprom in gid corupted ?
Correct display for this radio is Borg/Johnsons .. maybe your car needs correct display...
wbr
shiman
4th November, 2021, 12:31 PM
on the table is done
shooting
4th November, 2021, 12:42 PM
on the table is done
MUST be in the car.....
wbr
sanchos
8th November, 2021, 10:55 AM
Hi
I write org file in gid and no foult B1000-36.
Any idea?
Write yours file in radio and log with pin from gid ?
BR
shooting
8th November, 2021, 01:58 PM
Hi
I write org file in gid and no foult B1000-36.
Any idea?
Write yours file in radio and log with pin from gid ?
BR
I've made some changes, try this new dump and pair using 7272
wbr
DisNdaT
16th May, 2022, 10:49 PM
I've made some changes, try this new dump and pair using 7272
wbr
Hello all, Did this work?
I have a 25080 gid that i had Reset that throws a b1000-36 code that I cant' delete until the original dump is re-flashed.to the eeprom,
I would appreciate it if you could help me to fix this problem for my 2012 Corsa D.
all the best.
shooting
17th May, 2022, 06:20 AM
Hello all, Did this work?
I have a 25080 gid that i had Reset that throws a b1000-36 code that I cant' delete until the original dump is re-flashed.to the eeprom,
I would appreciate it if you could help me to fix this problem for my 2012 Corsa D.
all the best.
Here is your original display reset, PIN = 3906
wbr
DisNdaT
29th May, 2022, 12:29 PM
Here is your original display reset, PIN = 3906
wbr
Thank you for your speedy efforts and sorry for my delayed reply,
but unfortunately it still produces the the same "b1000-36 code".
FYI the gid and cd30mp3 were not original to the car, but bought as a matched pair with the aim of adding uhp4 bluetooth.
The original Radio code for the car was 3992
matched cd30mp3
shooting
29th May, 2022, 06:39 PM
Thank you for your speedy efforts and sorry for my delayed reply,
but unfortunately it still produces the the same "b1000-36 code".
FYI the gid and cd30mp3 were not original to the car, but bought as a matched pair with the aim of adding uhp4 bluetooth.
The original Radio code for the car was 3992
matched cd30mp3
Here is your radio set to Virgin, pair using 3992
wbr
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.