Edc17cp14 read and write with ktag 7.020

[ASCM]

Hello does anyone did tried to read and write ecm edc17cp14 golf 6
With' eu 'china red pcb clone tool

Sent from my SM-A125F using Tapatalk

[marko6jpt]

I've done with reworked ktag EU 7.020, all good.
Probably u'll be able to do it with your clone too

[elektronik325]

Hi. Forget chinese clones, won't read this ecu correctly. You will have a different reading each time. Or immediately the mistake of not finding the ecu. So it's a waste of time, and when you upload such a file, 99% of your ECU is poured out

[cristo_844]

I have Kess and Ktag clone bought in Aliexpress and boot can read ECD17 CP14 it no problem!

[tiugrikas]

Can confirm that ktag 7.020 china reads writes pefect done dozens in years

Išsiųsta naudojantis M2003J15SC Tapatalk 4 Lt

[ASCM]

Its reading ok but i dont know for writinghttps://uploads.tapatalk-cdn.com/20211109/f088f1f0efbd31ae4e32b15380de7812.jpg

Sent from my SM-A125F using Tapatalk

[cristo_844]

Mine writhes it no problem!

[labors]

I have done this ECU dozens of times with the cheapest clone 7.020. Remember that a clone is never a safe solution.
You can protect ECU with a good lab power supply.

[ASCM]

I have done this ECU dozens of times with the cheapest clone 7.020. Remember that a clone is never a safe solution.
You can protect ECU with a good lab power supply.I write file and it writed ok if the power its low
Where it the problem does the low power can destroy MCU !!

Sent from my SM-A125F using Tapatalk

[sofix]

Read OK. Write OK. clone Ktag

[ASCM]

Read OK. Write OK. clone KtagDoes the ktag clone can read write edc17cp46 vw passat without problem

Sent from my SM-A125F using Tapatalk

[Stelaras26]

i have done many edc17 with my ktag reworked,and never had any issue.
Problems come from failing power supply,and main ecu cable having bad quality.

[ASCM]

i have done many edc17 with my ktag reworked,and never had any issue.
Problems come from failing power supply,and main ecu cable having bad quality.My ktag its reworked in china its red pcb
Does it work ok for edc17cp46?

Sent from my SM-A125F using Tapatalk