ME7.5 BURNED OLD ECU, REPLACEING WITH NEW(IMMO OFF?)

[Superman1331]

Hello. I am replacing a me7.5 ecu and need immo off. For this to work, do i have to solder the chip, or is there any smart tricks to read/write immo off to the chip?

[rafal]

1 - open ecu
2 - desolder eeprom
3 - read in programmer
4 - post dump here
https://www.youtube.com/watch?v=NeO2sJDPESU

[Superman1331]

I only have kess and mpps avalible for use...

[rafal]

I only have kess and mpps avalible for use...

and ?????????????
invest for tools or give back car to somebody who will know what to do

[shinehead]

the immobilizer is in the eeprom so kess and mpps wont help u , you need tool to read eeprom and send dump here and we will do immo off , and u can write back and start the car ,and also when ecus get burnt most of the time the eeprom data is still fine, so try swapping eeprom first

[rafal]

the immobilizer is in the eeprom so kess and mpps wont help u , you need tool to read eeprom and send dump here and we will do immo off , and u can write back and start the car ,and also when ecus get burnt most of the time the eeprom data is still fine, so try swapping eeprom first

raed post #2................. all info there

[Superman1331]

Thanks for answers. I take the ecu to local tuner that has tools.

[Superman1331]

Hello. I have tried reading eeprom. Is this correct one?

[rafal]

Hello. I have tried reading eeprom. Is this correct one?
readed ok...............
as you said - ecu burned - find out why - especialy check wiring from 1st and 2nd lambda sensor

[Superman1331]

That if from before ecu burned. There is no immo in there, only full backup/maps?

[Superman1331]

UPDATE - I could do immo off with vcds(believe it or not) Thanks for input

[morgano]

UPDATE - I could do immo off with vcds(believe it or not) Thanks for input

Maybe you adapted ecu to dash. But immo off from within VCDS... curious. ;)

[Ninjor s]

For more help,if a member helps you hit thanks button otherwise no one will help you.846458

[Superman1331]

No one helped me, I googled myself. But got a lot of good suggestions

[Ninjor s]

So many suggestions, you are brave enough to say no one helped you.any way good luck.

[12manux]

You could just move phisically eeprom to donor ecu and avoid replying all day long on this thread .............................just saying :D

[Superman1331]

True true, just wasn't sure, or had solder to do the job. But everything is good, vcds saved my ass :D

[Superman1331]

So many suggestions, you are brave enough to say no one helped you.any way good luck.

My man, read how i fixed immo, not a single one in here told me i could adapt/trick immo with vcds.. I don't say people didn't try to help me, cause they did. But my fix is one i found myself D: